NAT now includes an 'interfaces' field in its response, filtered to
contain only the mapped NAT interface (virbr0 on Linux, vmnet8 on
macOS/Windows). This lets connected nodes discover the NAT subnet
and gateway address without needing to list all host interfaces.
The field format mirrors Cloud.asdict(): name, type, special, and
ip_addresses list (both IPv4 and IPv6).
Cloud and NAT nodes need live host network interface data. Previously,
GET /projects/{project_id}/nodes/{node_id} returned cached properties
from creation time, so newly added host interfaces (e.g. kernel bridges
created by EthernetSwitch nodes) were invisible until the node was
deleted and recreated.
Now the controller fetches fresh data from the compute node before
returning the response, so host interface changes are reflected
immediately. Falls back to cached data if compute is unreachable.
Replace psutil.net_if_addrs() scan with a deterministic name derived from
the switch's node UUID: gns3 + first 6 hex chars (10 chars, fits kernel
IFNAMSIZ limit of 15). Taps: <bridge>-<port> (12-13 chars).
Crash recovery: brctl delete the bridge first (best-effort), then create
fresh. Stale bridges from abnormal gns3server shutdown are automatically
reclaimed on the next start — no EEXIST or leaked interfaces.
Remove _free_iface helper and psutil import (no longer needed).
brctl create leaves the bridge administratively DOWN. Add link set up
so the bridge actually forwards frames between enslaved ports.
Also record Docker iptables FORWARD DROP pitfall in project memory.
Replace the builtin EthernetSwitch stub with a Linux kernel bridge backed
by uBridge's brctl module. Each switch node creates one kernel bridge
(gns3br{N}) with VLAN filtering; each port is a persistent TAP enslaved to
the bridge, relayed by a per-port uBridge bridge (nio_tap <-> nio_udp).
- Access/dot1q/qinq port modes translated to brctl vlan primitives
- Compute router repointed from Dynamips to Builtin manager
- Tests updated: 21 router-level tests + 215 surrounding tests pass
- Real-kernel e2e verified: access 100 PVID untagged, dot1q trunk
VIDs 1-4094 + native 1, qinq 802.1ad proto + 200 PVID
Ethertype 0x9100/0x9200 handling and port-count guard relaxation are
deferred pending resolution.
For Docker nodes, reload bottoms out as a raw POST /containers/{id}/restart
to the Docker daemon, bypassing GNS3's start/stop lifecycle (uBridge
re-attach, console servers, NIC setup). The container restarts at the
Docker level but GNS3's plumbing goes out of sync, and the daemon call can
block up to the controller's 240s timeout — manifesting as "reload hangs /
no response". stop+start runs the full lifecycle and is reliable.
Remove the node_reload and node_reload_all MCP tools (tool functions,
handlers, NODE_TOOLS entry, tests, docs). The underlying REST endpoints
(POST /nodes/{id}/reload, POST /nodes/reload) are kept for native API
users. MCP callers should use node_stop + node_start (partial) or
close/open project (full restart) instead.
A heredoc (<<<) closes stdin at once, so websocat dropped the WebSocket
before the device's reply arrived. Add --no-close to the node_console usage
examples and the returned command field so the connection stays open while
output is read.
get_current_active_user_from_websocket returns None after closing the socket
on an auth failure (revoked token, bad credentials, inactive user).
has_privilege_on_websocket dereferenced current_user.is_superadmin without a
None check, so any websocket auth failure surfaced as an AttributeError
traceback instead of a clean close. Bail out early when current_user is None,
mirroring the guard already present in ws_console.
Token revocation is a strict version check (token_data.token_version !=
user.token_version). create_access_token defaults token_version to 0, so the
short-lived JWTs minted for the console WebSocket URL (nodes) and the download
URLs (symbols, links) carried ver=0. Any user who had logged out at least once
(token_version >= 1, e.g. the default admin) got tokens rejected as "revoked"
on first use.
e433991cf fixed this in _resolve_token's API-key branch but missed these three
independent minting sites. Now resolve token_version during _resolve_token (the
JWT branch decodes it, the API-key branch reads user.token_version), carry it
through gns3_ctx, and pass it at every minting call.
_resolve_token generated a temp JWT with a hardcoded ver=0 after
validating the API key. Users who had logged out at least once
(token_version >= 1) would hit "Token has been revoked" 401 on
every MCP tool call, because the REST auth chain rejects ver=0
when the user's token_version no longer matches.
Fix: pass the user's actual token_version to create_access_token
so the temp JWT carries the correct ver claim.
_start_ubridge configures the marker sink via _ubridge_configure_marker_sink, which used _ubridge_send. But _start_ubridge itself is reached THROUGH _ubridge_send when uBridge is started lazily — e.g. linking a stopped node. _ubridge_send's @locking lock (___ubridge_send_lock) is non-reentrant, so the nested _ubridge_send('marker sink') deadlocked forever, making the NIO create POST time out after 120s. Started nodes never hit this (uBridge already running, no _start_ubridge), so only stopped-node links (notably dynamips) hung.
_ubridge_configure_marker_sink now talks to self._ubridge_hypervisor.send directly: it runs inside _start_ubridge right after connect(), so uBridge is already up and the raw send is safe, with no reentrant lock acquisition.
Add a Per-link attribution section (link field semantics, pcap path keyed on link) with an IOU subsection explaining the shared IOL-BRIDGE and per-port filter lists. Note that the marker.match link_id comes from the signal link= field, and call out shared capture-side node behavior in Notes.
A uBridge MARK signal carries only node= and filter= (no bridge/link field), so when one node is the capture side for several links that share a marker name (always the case for global-{name} definitions on a multi-interface node) the signals were indistinguishable and the (node, filter) registry collapsed them to a single link.
The mark filter is now stamped with its link id (mark <bpf> ... link <link_id>); uBridge echoes it verbatim (link=<link_id>) and the listener uses the signal's link= as the authoritative link_id of the marker.match event, falling back to the registry only for legacy signals without it. base_node and iou apply paths pass link_id; covered by two new listener tests.
The PUT /nio (update) endpoints for iou, dynamips and cloud copied nio.filters from the request body but never copied nio.markers. So adding a marker (e.g. a project-level global definition) to an already-created link of these node types left nio.markers empty: no mark filter was installed on uBridge and no marker.match signal was emitted. vpcs/qemu/docker already set it; mirror them (getattr for the Union NIO types).
19 controller-layer tests covering start/stop/update_marker (storage,
inheritance guards + bypasses, partial-update preservation of render
hints), project-def CRUD (fan-out, sync, delete-cleanup regression),
apply_defs_to_new_link, persist_markers/asdict, and aggregation.
15 API-route tests covering per-link create/update/delete (201/200/204),
global-prefix rejection on create (409 regression), bad-format rejection
(422), PUT/DELETE-on-inherited guard (409 regression), project-def CRUD
endpoints, and the aggregation view.
All 34 tests pass when run as part of the full suite.
Document the marker feature following the gns3-documentation standard:
overview, Mermaid architecture and business-process diagrams, API endpoint
tables, request/response and field reference, error responses, and notes
covering the key design points — immutable name (rename = delete + create),
global-prefix reservation, read-only inherited markers, render hints
(color / highlight_duration), supported node types, and persistence.
Indexed under Features in docs/README.md.
The global-prefix reservation belongs on the create path, where it keeps
user-chosen names disjoint from inherited global-{name} markers. It was
implemented as a field_validator on MarkerCreate / MarkerDefinitionCreate,
which also back the PUT update bodies — so updating an inherited marker
while echoing its name in the body tripped the validator with a generic
422 before the controller could return the actionable 409 ("inherited,
use the marker-definitions API").
Drop the schema validators and enforce the prefix in the two create routes
(ControllerError -> 409). PUT no longer validates the body name (ignored
anyway — the target is the {name} path param), so editing an inherited
marker now reaches the controller's inheritance guard and returns the
clear 409. The name-format regex stays on the schema (still 422).
delete_marker_definition removed the def but left the inherited global-*
copies on every link: it called stop_marker(), which rejects inherited
markers (409), and the ControllerError was swallowed as a warning. The
orphaned copies were in-memory only (_persist_markers filters inherited
markers) so a restart hid the symptom, but during a running session they
were undeletable via either the per-link or project API.
Add the same inherited=True bypass that update_marker already has, and
pass it from the def-delete fan-out so the copies are removed for real.
Per-marker UI hint (milliseconds, ge=1) for how long the Web UI keeps a
marker highlighted after a match. Mirrors color: stored on the link,
persisted in the topology, inherited via project-level definitions, and
never sent to uBridge. Omitted = null = frontend uses its own default.
The default is intentionally NOT set in the schema: MarkerCreate also
backs PUT updates, so a schema default would make every partial update
silently reset the value. None means "not provided" (keep existing on
update / frontend decides on create).
Bugs found via end-to-end testing of project-level marker definitions:
1. New links didn't inherit — apply_defs_to_new_link is async but was
called without await in UDPLink.create().
2. Project load crashed — load_project passed marker_definitions to
Project.__init__. Now popped in load_project and restored separately
in Project.open() (it backs a read-only property).
3. PUT on a definition didn't sync to links — update_marker's guard
rejected even the project-layer sync call. Added an `inherited`
bypass flag used by update_marker_definition.
4. _ubridge_add_marker_filter raised re.PatternError — the name regex
used (?i)(?!global) look-around, invalid in Python's re module.
Dropped the prefix check there: "global-*" names are legitimate at
the uBridge boundary (inherited definitions); forbidden only at the
user-facing schema.
5. GET /links hid inherited markers — asdict()'s runtime branch used
_persist_markers() (which filters inherited markers). Restored
self._markers for the runtime branch; only the topology_dump branch
filters (inherited markers are rebuilt from definitions on load).
6. Duplicate "already exists" warnings on project open — open() fanned
out definitions to all links, but UDPLink.create() had already done
so via its inheritance hook. Removed the redundant fan-out in open().
pydantic_core (Rust engine) does not support regex look-around.
Keep the character-class pattern for basic safety and enforce the
"global" prefix reservation via a field_validator instead.
Project-level marker definitions fan out to every link (existing and new).
A definition is stored once on Project._marker_definitions; when applied to
a link the marker is named "global-{def_name}" — the "global" prefix was
pre-reserved in the schema, so inherited and per-link markers can never
collide, nor will their registry keys.
Key behavior:
- POST /projects/{pid}/marker-definitions → fan out to all existing links
- PUT /projects/{pid}/marker-definitions/{name} → sync all inherited copies
- DELETE → remove every inherited copy from every link
- New links auto-inherit all active defs (hook in UDPLink.create)
- Per-link DELETE/PUT of a "global-*" marker is rejected (409)
- Inherited markers are NOT persisted in the topology; they are re-created
from _marker_definitions on project load
- Compute side is untouched — the marker reaches uBridge via the existing
start_marker→update→NIO→ubridge pipeline
Files:
- controller/project.py — _marker_definitions + CRUD + fanout + topology load
- controller/link.py — Link.inherit_marker() + asdict() filter
- controller/udp_link.py — guards on stop/update + create() inheritance hook
- controller/topology.py — persist marker_definitions in project topology
- schemas/controller/links.py — MarkerDefinitionCreate schema
- api/routes/controller/projects.py — REST endpoints (marker-definitions)
Dynamips needed its own NIO base class extended with a `_markers`
attribute and `markers` property (mirroring the existing `filters`
pattern), plus marker propagation from the controller-supplied NIO
settings through NIOUDP.create/update to the common destination
NIO that base_node._ubridge_apply_markers reads.
Cloud simply needed the missing _ubridge_apply_markers calls after
_ubridge_apply_filters in its two ubridge connection methods, same
pattern as the earlier docker fix.
Both types are now added back to _MARKER_CAPABLE_TYPES.
Docker's _connect_nio and adapter_update_nio_binding applied packet
filters but never called _ubridge_apply_markers, so markers silently
did nothing on Docker links despite docker being in the allowlist.
Add the missing calls (same pattern as the IOU fix).
Also narrow _MARKER_CAPABLE_TYPES to the four types that actually
implement marker support — vpcs, qemu, docker, iou — removing
dynamips, virtualbox, vmware, and cloud which have no marker pathway
and would silently fail when selected as the capture side.
When the configured marker_listen_port (default 3070) is already in
use, fall back to an OS-assigned port instead of crashing the server.
If even port 0 fails, log the error and continue without marker
signals — traffic insight degrades rather than taking down startup.
Add a name pattern constraint to MarkerCreate schema (alphanumeric +
_.-) to prevent injection into uBridge commands, with a matching
defense-in-depth check in _ubridge_add_marker_filter for hand-edited
topology files. Also add the missing "enabled" field to MarkerCreate
and pass it through the PUT route so the documented toggle actually
works.
Auto-generating `marker-{link.id[:8]}` collided on the second anonymous
marker on the same link (start_marker rejects duplicate names). Append a
short uuid hex suffix so multiple anonymous markers coexist.
Add a read-only `markers` property on Project that flattens every link's
markers into a single dict keyed by "{link_id}/{name}", each entry
carrying the parent link_id and capture-side node_id. Expose it via
GET /projects/{pid}/markers (Project.Audit) so the frontend can fetch all
markers in one round-trip instead of enumerating links first.
Also surface a marker count in project.stats().
IOU uses iol_bridge (not bridge) with extra bay/unit positional
arguments in add_packet_filter. Add _ubridge_apply_markers override
that mirrors the existing _ubridge_apply_filters pattern, called at
the same three sites: _networking, adapter_add_nio_binding, and
adapter_update_nio_binding.
Markers now follow exactly the same apply pattern as packet filters:
state lives in Link._markers, application goes through NIO
(update() -> PUT /nio -> _ubridge_apply_markers). The former
immediate-apply REST endpoints (/markers/start, /markers/stop on
the compute side) and the per-node start_marker/stop_marker methods
are removed — they were a legacy of the original capture-inspired
design and have been superseded by the NIO flow.
Changes:
- controller/udp_link: start_marker/stop_marker/update_marker now
set _markers state + call self.update() (mirrors update_filters).
Removed _marker_capture_nodes runtime dict and its helpers.
- controller/project: _create_link_from_topology_data restores
_markers directly from persisted data (with BPF validation,
like filter reload). No long calls start_marker during load.
- compute: _ubridge_apply_markers swallows BPF compile errors
(warn+skip), matching _ubridge_apply_filters behaviour so a
single bad expression cannot break link creation / node restart.
- Removed: /markers/start,stop endpoints (6 handlers across
vpcs/qemu/docker route files), node start_marker/stop_marker
methods (3 VM files), _ubridge_delete_marker_filter,
_marker_capture_nodes, MarkerDelete schema.
Net: ~280 lines of dead code removed; marker and packet filter now
share a single, unified apply path via the NIO.
_create_link_from_topology_data now restores traffic-insight markers
(mirroring how filters are restored via update_filters), so markers —
including their color — survive project close/reopen and server restart.
Guard start_marker's uBridge POST with 'if self._created' (exactly as
update_filters guards its update() call): during project load the link
is not yet created, so only _markers state is recorded and the marker
is applied once via the NIO flow in create()/_ubridge_apply_markers —
no double application.
Add a user-chosen hex color (e.g. '#ff5722') to each marker, stored in
Link._markers alongside bpf/tag/enabled. The color:
- Is serialized with the link (asdict) and persisted in the topology, so
it survives project reload and is consistent across devices.
- Never reaches uBridge (compute ignores it) — it is purely a Web UI
concern.
- Can be updated independently of the BPF (color-only changes skip the
ubridge round-trip).
MarkerCreate schema gains color: Optional[str]; start_marker and
update_marker carry it through; REST create/update endpoints pass it.
The marker.match WebSocket event stays lean (no color) — the Web UI maps
filter -> color from the link state it already holds.
Replace the complex tier-based fallback (which leaked into unsupported
switch types on the final tiers) with a simple allowlist of
_MARKER_CAPABLE_TYPES, mirroring _get_filter_node in link.py.
Also accept stopped nodes — like packet filters, markers are stored on
the NIO and applied when the node starts via _ubridge_apply_markers.
Markers are persistent link-scoped features (like packet filters), not
transient runtime features (like capture). Tearing them down on every
node stop breaks stop/start restore: the NIO-based re-application in
_ubridge_apply_markers works correctly on restart, but node_updated
was prematurely calling stop_marker which erased _markers state and
dumped an empty topology.
Now markers survive node stop transparently — the ubridge filter dies
with the process but is re-added from nio.markers in
add_ubridge_udp_connection when the node starts again, mirroring
exactly how packet filters behave.
Mirror the packet-filter lifecycle: marker specs now live on the NIO
(next to filters), ride in link_data from controller to compute on
every NIO create/update, and are reapplied by _ubridge_apply_markers
in add_ubridge_udp_connection (bridge creation / node restart) and
update_ubridge_udp_connection (NIO update — following the preceding
reset_packet_filters so markers survive filter changes).
Changes:
- NIO / NIOUDP: _markers property + asdict
- schemas/compute/nios.py: UDPNIO.markers field
- base_manager.create_nio: nio.markers from settings
- PUT /nio routes (vpcs/qemu/docker): nio.markers update
- base_node: _ubridge_apply_markers(bridge_name, nio) iterates
nio.markers, computes pcap path, calls _ubridge_add_marker_filter
+ MarkerManager.register; called after _ubridge_apply_filters
- controller udp_link: _get_node_markers + _markers_for_node (route
by capture_node_id); markers in create() and update() link_data
- /markers/start,stop endpoints: mirror spec onto nio.markers so
the marker survives a subsequent node stop/start without a PUT
- tests: add markers field to NIO data expectations
This covers:
- Node restart: NIO persists, add_ubridge_udp_connection re-applies
- Filter update: reset wipes markers, _ubridge_apply_markers re-adds
- Project reload: create() carries markers in link_data → create_nio
- Immediate create: endpoint sets nio.markers immediately
Change the marker UDP sink default from port=0 (OS-chosen) to 3070 for
predictable firewall/debugging/monitoring.
Add marker_listen_host and marker_listen_port with documentation to
config_samples/gns3_server.conf and scripts/gns3_server.conf.
_choose_capture_side prefers BUILTIN_NODE_TYPES which includes
ethernet_switch/ethernet_hub/NAT etc. — nodes that do not use uBridge
and therefore have no bridge for a marker filter to attach to.
Add _choose_marker_side with a _MARKER_UNSUPPORTED_TYPES blocklist
so marker capture-side selection skips NIO-only switches and picks
the uBridge-backed node (VPCS/QEMU/Docker/etc.) instead.
Verified end-to-end: PC1↔Switch↔PC2 links with arp markers correctly
pick VPCS nodes; MARK signals flow through to WebSocket and pcaps
are written.
