diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000..8726b0b
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,7 @@
+all:
+	echo ok
+
+deploy-nfs-config:
+	stat /etc/kolla
+	mkdir -p /etc/kolla/config/
+	cp -vf nfs_shares /etc/kolla/config/nfs_shares
diff --git a/cleanup-multinode.sh b/cleanup-multinode.sh
new file mode 100755
index 0000000..17f8bcc
--- /dev/null
+++ b/cleanup-multinode.sh
@@ -0,0 +1,30 @@
+#!/usr/bin/env bash
+
+set -xe  # Added -e to stop execution if a command fails
+
+echo "--- Running Pre-flight Checks ---"
+
+# 1. Check if the user is root
+if [[ $EUID -ne 0 ]]; then
+   echo "ERROR: This script must be run as root (use sudo)."
+   exit 1
+fi
+
+# 4. Check for enough RAM (Kolla-Ansible usually needs 8GB+ for All-in-One)
+TOTAL_RAM=$(free -g | awk '/^Mem:/{print $2}')
+if [ "$TOTAL_RAM" -lt 8 ]; then
+    echo "WARNING: You only have ${TOTAL_RAM}GB of RAM. OpenStack might be very slow or fail to deploy."
+fi
+
+echo "--- Pre-flight Checks Passed! Starting Installation ---"
+
+KOLLA_VENV="/opt/ansible-kolla-venv"
+KOLLA_WORKING="/opt/ansible-kolla"
+
+source "${KOLLA_VENV}/bin/activate"
+
+cd "${KOLLA_WORKING}"
+
+ansible -i /opt/ansible-kolla/multinode all -m script -a "/opt/ansible-kolla-venv/share/kolla-ansible/tools/cleanup-host" --become
+
+set +xe
diff --git a/deploy-multinode.sh b/deploy-multinode.sh
new file mode 100755
index 0000000..ccf0836
--- /dev/null
+++ b/deploy-multinode.sh
@@ -0,0 +1,134 @@
+#!/usr/bin/env bash
+
+set -xe  # Added -e to stop execution if a command fails
+
+
+# Defaults
+FIRST_INTERFACE="${1:-enp1s0}"
+
+# enentually will be physnet1 in open stack networks
+EXTERNAL_INTERFACE="${2:-enp3s0}"
+
+
+# this should not be pingable in the installtion
+INTERNAL_IP="${3:-192.168.1.210}"
+
+echo "--- Running Pre-flight Checks ---"
+
+# 1. Check if the user is root
+if [[ $EUID -ne 0 ]]; then
+   echo "ERROR: This script must be run as root (use sudo)."
+   exit 1
+fi
+
+# 3. Ensure the VIP is NOT pingable (must be free)
+echo "Checking if VIP $INTERNAL_IP is available..."
+if ping -c 1 -W 1 "$INTERNAL_IP" > /dev/null 2>&1; then
+    echo "ERROR: VIP $INTERNAL_IP is already responding to pings!"
+    echo "Choose an unused IP in the same subnet as $FIRST_INTERFACE."
+    exit 1
+fi
+
+# 4. Check for enough RAM (Kolla-Ansible usually needs 8GB+ for All-in-One)
+TOTAL_RAM=$(free -g | awk '/^Mem:/{print $2}')
+if [ "$TOTAL_RAM" -lt 8 ]; then
+    echo "WARNING: You only have ${TOTAL_RAM}GB of RAM. OpenStack might be very slow or fail to deploy."
+fi
+
+echo "--- Pre-flight Checks Passed! Starting Installation ---"
+
+
+KOLLA_VENV="/opt/ansible-kolla-venv"
+KOLLA_WORKING="/opt/ansible-kolla"
+
+# 2. Virtual Environment Setup
+source "${KOLLA_VENV}/bin/activate"
+
+cd "${KOLLA_WORKING}"
+
+# Install Ansible and Galaxy roles
+kolla-ansible install-deps
+kolla-genpwd
+
+# 4. Patch globals.yml
+GLOBALS_FILENAME="/etc/kolla/globals.yml"
+
+enable_kolla_options() {
+    local globals_file="$1"
+    shift # Remove the first argument, leaving only the option names
+    local options=("$@")
+
+    for option in "${options[@]}"; do
+        echo "Enabling ${option}..."
+        # This regex looks for lines starting with #option: and replaces
+        # the entire line with the enabled version.
+        sed -i "s@^#${option}:.*@${option}: \"yes\"@g" "${globals_file}"
+    done
+}
+
+#openstack_release: "master"
+sed -i "s@^#openstack_release:.*@openstack_release: \"2025.2\"@g" "${GLOBALS_FILENAME}"
+
+# Note: Using @ as delimiter to avoid issues with potential paths
+sed -i "s@^#kolla_base_distro:.*@kolla_base_distro: \"rocky\"@g" "${GLOBALS_FILENAME}"
+sed -i "s@^#network_interface:.*@network_interface: \"${FIRST_INTERFACE}\"@g" "${GLOBALS_FILENAME}"
+sed -i "s@^#neutron_external_interface:.*@neutron_external_interface: \"${EXTERNAL_INTERFACE}\"@g" "${GLOBALS_FILENAME}"
+sed -i "s@^#kolla_internal_vip_address:.*@kolla_internal_vip_address: \"${INTERNAL_IP}\"@g" "${GLOBALS_FILENAME}"
+
+# Define the services you want to toggle
+SERVICES_TO_ENABLE=(
+    "enable_horizon"
+    "enable_neutron_fwaas"
+    "enable_neutron_qos"
+    "enable_cinder"
+    "enable_mariadb"
+    "enable_valkey"
+    "skip_cinder_backend_check"
+    "enable_cinder_backend_nfs"
+    "enable_cinder_backup"
+)
+
+# Call the function
+enable_kolla_options "${GLOBALS_FILENAME}" "${SERVICES_TO_ENABLE[@]}"
+
+#sed -i "s@^#enable_cinder_backend_nfs:.*@enable_cinder_backend_nfs: true@g" "${GLOBALS_FILENAME}"
+#sed -i "s@^#enable_cinder_backend_lvm:.*@enable_cinder_backend_lvm: true@g" "${GLOBALS_FILENAME}"
+#sed -i "s@^#cinder_volume_group:.*@cinder_volume_group: \"cinder-volumes\"@g" "${GLOBALS_FILENAME}"
+#sed -i "s@^#enable_octavia:.*@enable_octavia: true@g"  "${GLOBALS_FILENAME}"
+sed -i "s@^cinder_backup_driver:.*@cinder_backup_driver: \"nfs\"@g" "${GLOBALS_FILENAME}"
+sed -i "s@^cinder_backup_share:.*@cinder_backup_share: \"192.168.1.21:/os_data\"@g" "${GLOBALS_FILENAME}"
+
+OCTAVIE_CERT_CONF=$(grep "octavia_certs_organizational_unit: Octavia" "${GLOBALS_FILENAME}" |wc -l)
+if [ "${OCTAVIE_CERT_CONF}"-eq "0" ]
+then
+cat <<EOF >>  "${GLOBALS_FILENAME}"
+octavia_certs_country: IL
+octavia_certs_state: Shomron
+octavia_certs_organization: NgTech LTD
+octavia_certs_organizational_unit: Octavia
+EOF
+fi
+
+# 5. Deployment
+kolla-ansible bootstrap-servers -i ./multinode
+
+kolla-ansible octavia-certificates  -i ./multinode
+
+kolla-ansible prechecks -i ./multinode
+
+# Since 2026.2
+#kolla-ansible prechecks -i ./all-in-one --use-test-images
+
+kolla-ansible deploy -i ./multinode
+
+# 6. Post-Install
+pip install python-openstackclient
+kolla-ansible post-deploy -i ./multinode
+
+echo "Deployment Complete. Credentials located in /etc/kolla/admin-openrc.sh"
+deactivate
+
+pip install -U pip
+pip install python-openstackclient
+
+set +xe
diff --git a/init-multinode.sh b/init-multinode.sh
new file mode 100755
index 0000000..ebc2995
--- /dev/null
+++ b/init-multinode.sh
@@ -0,0 +1,69 @@
+#!/usr/bin/env bash
+
+set -xe  # Added -e to stop execution if a command fails
+
+
+# Defaults
+FIRST_INTERFACE="${1:-enp1s0}"
+
+# enentually will be physnet1 in open stack networks
+EXTERNAL_INTERFACE="${2:-enp3s0}"
+
+
+# this should not be pingable in the installtion
+INTERNAL_IP="${3:-192.168.1.210}"
+
+echo "--- Running Pre-flight Checks ---"
+
+# 1. Check if the user is root
+if [[ $EUID -ne 0 ]]; then
+   echo "ERROR: This script must be run as root (use sudo)."
+   exit 1
+fi
+
+# 2. Check if the network interfaces actually exist
+for iface in "$FIRST_INTERFACE" "$EXTERNAL_INTERFACE"; do
+    if ! ip link show "$iface" > /dev/null 2>&1; then
+        echo "ERROR: Interface $iface not found. Check your 'ip link' output."
+#        exit 1
+    fi
+done
+
+# 3. Ensure the VIP is NOT pingable (must be free)
+echo "Checking if VIP $INTERNAL_IP is available..."
+if ping -c 1 -W 1 "$INTERNAL_IP" > /dev/null 2>&1; then
+    echo "ERROR: VIP $INTERNAL_IP is already responding to pings!"
+    echo "Choose an unused IP in the same subnet as $FIRST_INTERFACE."
+    exit 1
+fi
+
+# 4. Check for enough RAM (Kolla-Ansible usually needs 8GB+ for All-in-One)
+TOTAL_RAM=$(free -g | awk '/^Mem:/{print $2}')
+if [ "$TOTAL_RAM" -lt 8 ]; then
+    echo "WARNING: You only have ${TOTAL_RAM}GB of RAM. OpenStack might be very slow or fail to deploy."
+fi
+
+echo "--- Pre-flight Checks Passed! Starting Installation ---"
+
+
+# 1. Install System Dependencies
+dnf install -y git python3-devel libffi-devel gcc openssl-devel python3-libselinux plocate
+
+KOLLA_VENV="/opt/ansible-kolla-venv"
+KOLLA_WORKING="/opt/ansible-kolla"
+
+mkdir -p "${KOLLA_VENV}" "${KOLLA_WORKING}" /etc/kolla
+
+# 2. Virtual Environment Setup
+python3 -m venv "${KOLLA_VENV}"
+source "${KOLLA_VENV}/bin/activate"
+
+pip install -U pip
+pip install git+https://opendev.org/openstack/kolla-ansible@stable/2025.2
+
+# 3. Configuration Setup
+cp -r ${KOLLA_VENV}/share/kolla-ansible/etc_examples/kolla/* /etc/kolla
+cd "${KOLLA_WORKING}"
+stat multinode || cp ${KOLLA_VENV}/share/kolla-ansible/ansible/inventory/multinode .
+
+set +xe
diff --git a/install.sh b/install-all-in-one.sh
similarity index 83%
rename from install.sh
rename to install-all-in-one.sh
index 89566c8..22296eb 100755
--- a/install.sh
+++ b/install-all-in-one.sh
@@ -11,7 +11,7 @@ EXTERNAL_INTERFACE="${2:-enp3s0}"
 
 
 # this should not be pingable in the installtion
-INTERNAL_IP="${3:-192.168.220.245}"
+INTERNAL_IP="${3:-192.168.210}"
 
 echo "--- Running Pre-flight Checks ---"
 
@@ -65,8 +65,9 @@ pip install git+https://opendev.org/openstack/kolla-ansible@stable/2025.2
 cp -r ${KOLLA_VENV}/share/kolla-ansible/etc_examples/kolla/* /etc/kolla
 cd "${KOLLA_WORKING}"
 stat all-in-one || cp ${KOLLA_VENV}/share/kolla-ansible/ansible/inventory/all-in-one .
-stat multinode || cp ${KOLLA_VENV}/share/kolla-ansible/ansible/inventory/multinode .
 
+echo "take your time to setup the config files, then press enter..."
+read
 
 # Install Ansible and Galaxy roles
 kolla-ansible install-deps
@@ -102,12 +103,12 @@ SERVICES_TO_ENABLE=(
     "enable_horizon"
     "enable_neutron_fwaas"
     "enable_neutron_qos"
-    "enable_cinder"
+#    "enable_cinder"
     "enable_mariadb"
     "enable_valkey"
-    "skip_cinder_backend_check"
-    "enable_cinder_backend_nfs"
-    "enable_cinder_backup"
+#    "skip_cinder_backend_check"
+#    "enable_cinder_backend_nfs"
+#    "enable_cinder_backup"
 )
 
 # Call the function
@@ -117,8 +118,8 @@ enable_kolla_options "${GLOBALS_FILENAME}" "${SERVICES_TO_ENABLE[@]}"
 #sed -i "s@^#enable_cinder_backend_lvm:.*@enable_cinder_backend_lvm: true@g" "${GLOBALS_FILENAME}"
 #sed -i "s@^#cinder_volume_group:.*@cinder_volume_group: \"cinder-volumes\"@g" "${GLOBALS_FILENAME}"
 #sed -i "s@^#enable_octavia:.*@enable_octavia: true@g"  "${GLOBALS_FILENAME}"
-sed -i "s@^cinder_backup_driver:.*@cinder_backup_driver: \"nfs\"@g" "${GLOBALS_FILENAME}"
-sed -i "s@^cinder_backup_share:.*@cinder_backup_share: \"192.168.1.21:/os_data\"@g" "${GLOBALS_FILENAME}"
+#sed -i "s@^cinder_backup_driver:.*@cinder_backup_driver: \"nfs\"@g" "${GLOBALS_FILENAME}"
+#sed -i "s@^cinder_backup_share:.*@cinder_backup_share: \"192.168.1.21:/os_data\"@g" "${GLOBALS_FILENAME}"
 
 cat <<EOF >>  "${GLOBALS_FILENAME}"
 octavia_certs_country: IL
@@ -128,32 +129,23 @@ octavia_certs_organizational_unit: Octavia
 EOF
 
 # 5. Deployment
-#kolla-ansible bootstrap-servers -i ./all-in-one
-kolla-ansible bootstrap-servers -i ./multinode
+kolla-ansible bootstrap-servers -i ./all-in-one
 
+kolla-ansible octavia-certificates  -i ./all-in-one
 
-#kolla-ansible octavia-certificates  -i ./all-in-one
-kolla-ansible octavia-certificates  -i ./multinode
-
-
-
-#kolla-ansible prechecks -i ./all-in-one
-kolla-ansible prechecks -i ./multinode
+kolla-ansible prechecks -i ./all-in-one
 
 
 # Since 2026.2
 #kolla-ansible prechecks -i ./all-in-one --use-test-images
 
 
-#kolla-ansible deploy -i ./all-in-one
-kolla-ansible deploy -i ./multinode
+kolla-ansible deploy -i ./all-in-one
 
 
 # 6. Post-Install
 pip install python-openstackclient
-#kolla-ansible post-deploy -i ./all-in-one
-kolla-ansible post-deploy -i ./multinode
-
+kolla-ansible post-deploy -i ./all-in-one
 
 echo "Deployment Complete. Credentials located in /etc/kolla/admin-openrc.sh"
 deactivate
diff --git a/nfs_shares b/nfs_shares
new file mode 100644
index 0000000..6145d6a
--- /dev/null
+++ b/nfs_shares
@@ -0,0 +1 @@
+192.168.1.21:/srv/os_data