YueGuobin 5c2c8cdb0c

test(e2e): a live end-to-end suite, Dynamips as the first scenario ...

Live e2e verification moves into the repository instead of being rewritten
as a throwaway script every time: tests/e2e/ carries a shared harness (REST
client, isolated-instance lifecycle, a deliberately dumb IOS console
driver, host-side kernel inspection: bridge membership, tap admin state,
tc qdiscs) and each node type adds only its scenario module. The e2e marker
plus 'addopts = -m "not e2e"' keeps these privileged, image-dependent
tests out of normal runs; they are opt-in: pytest -m e2e tests/e2e -s.

The harness targets an existing server via GNS3_E2E_URL or starts an
isolated instance (own config dir — DB and paths follow it — on a free
port) and deletes its project afterwards (GNS3_E2E_KEEP=1 keeps it on
failure).

The first scenario drives two real c7200 routers on a real IOS image
through the REST API and the consoles: the kernel link is created while the
routers are stopped (deferred wiring), the per-link kernel bridge enslaves
exactly the two anchors, real ICMP crosses it, delay 100 shows netem on
both anchors and grows the RTT (~200 ms), suspend kills the traffic on an
admin-down anchor, capture writes a pcap of ICMP records, a serial link
between the same routers stays on the relay and still pings, delete/
re-create and stop/start leave the wiring consistent, and deleting the
project removes every anchor and bridge. A negative control runs the same
topology on an isolated relay-configured instance (no per-link bridge,
nothing enslaved, still pings).

2026-10-06 00:21:09 +08:00

0 lines

0 B

Python

Raw Blame History

The file is empty.