The Ethernet switch's kernel fast path: instead of a link crossing the
switch's per-port uBridge relay, the switch absorbs the peer's anchor into
its own kernel bridge. The peer's interface (Docker veth host end, QEMU
TAP, IOU port TAP, Dynamips port TAP) becomes the switch port, and frames
cross anchor -> switch bridge -> switch ports entirely in the kernel.
Wire format: the switch end receives nio_anchor ('join this interface to
my own bridge' — the mirror of nio_bridge), the peer end nio_bridge with a
null bridge ('your anchor is bridged elsewhere': carrier, markers and
impairments only — never bridge membership, and never a bridge delete, on
an interface this node does not own). Anchor names come from the shared
naming contract (utils.kernel_anchor), a pure function of node type, id,
adapter and port — the controller computes the peer's anchor while the
node may be stopped, which is what makes links to stopped nodes wireable.
Stopped peers defer the join; after any node of a link starts
(UDPLink.node_started) the controller re-pushes the switch NIO, and the
switch completes — or repairs, when a peer restart replaced its interface
under the same name — the join against the kernel's actual membership
instead of assuming it.
VLAN changes now edit membership in place: only the ports whose mode/VLAN
actually changed are touched, each losing exactly the previous mode's
entries the new mode does not want (the dot1q admits-all entry is one
range operation in both directions), and no port ever leaves the bridge to
change its VLANs. This replaces the old 'reset by re-enslaving' shortcut
(delif+addif on every wired port, added when the ports were the switch's
own TAPs): on absorbed anchors, re-enslaving an interface owned by another
node is where live testing watched links die — anchors occasionally lost
their bridge membership right after a ports_mapping update (later updates
then failed with delif EINVAL), reproducibly with qemu, IOU and Dynamips
peers and never with Docker's veths.
Eligibility: the switch side needs no capability of its own (its bridge
exists by construction); the peer must be able to anchor. Switch-to-switch
cascades stay on the relay — a kernel interface belongs to one bridge, and
joining two bridges needs a veth pair, deferred.
Verified live on a real server: qemu peers through four VLAN cycles with
both anchors enslaved throughout; a mixed switch (2 IOU + 2 Dynamips, four
kernel ports); Docker peers with real ICMP isolating and recovering (with
both anchors still enslaved); VPCS relay ports likewise in place.
QEMU had no host-side interface at all: every adapter was a local UDP tunnel
into uBridge (-netdev socket plus two UDP ports per adapter), so a link could
only ever be a userspace relay. Each adapter now owns a persistent TAP
(gq{node_id[:8]}e{adapter}p{port}), created by uBridge before QEMU is launched
and handed to this user, and the netdev is that TAP -- the anchor role Docker's
veth host end plays. Links attach to it:
* kernel link (NIOBridge): brctl create/up/addif enslaves the TAP into the
per-link bridge and capture, markers and tc filters are installed on it,
verbatim through the shared KernelDatapathMixin -- a TAP and a veth host end
are interchangeable there (an egress qdisc on either impairs traffic entering
the node, and PACKET_OUTGOING on either is the node receiving);
* relay link: bridge add_nio_ethernet plus add_nio_udp -- AF_PACKET, never the
TAP NIO, which would take the fd QEMU itself holds.
The netdev type is fixed at launch, so this is all-or-nothing per VM: on the
TAP datapath every link type attaches to (or detaches from) a running VM,
including switching a link between the two datapaths. Stop un-persists the
TAPs (QEMU's open fd keeps each device alive until it exits) and removes the
per-link bridges; start sweeps leftovers first. A uBridge without the tap
module keeps the previous socket-netdev datapath, so an unupgraded install is
unaffected -- such a node simply cannot carry kernel links.
Move the datapath-agnostic half of DockerKernelDatapathMixin into a new
KernelDatapathMixin (compute/kernel_datapath.py) so a second node type can
reuse it verbatim: the three marker primitives, the tc netem / cls_bpf / eBPF
appliers, the uBridge tc-capability probe, kernel marker teardown, link
detach, the per-link bridge cleanup and the adapter carrier -- plus
_kernel_attach(), lifted from DockerVM._connect_nio's kernel branch.
The mixin talks about "the anchor" (the host-side interface an adapter owns in
the root namespace) instead of "the veth host end": a node type provides
_kernel_host_ifc(), _kernel_anchors() and, when needed, _relay_carrier_bridge()
and _kernel_error(). Docker keeps only the veth lifecycle and those hooks;
behaviour is unchanged.
The C901 baseline entry moves with _netem_command_parts (the docker module is
no longer over the limit) and the bpf-compile-failure test patches the logger
of the module that now owns the code -- net zero new ignores.
