Compute:
- Track the anchor that owns uBridge's single AF_PACKET capture slot: a
second kernel port's capture is refused with a clear error (its flag
rolled back), a failed start no longer wedges the port, and only the
owning port's stop issues the process-wide `capture stop_kernel`
(docker/qemu/iou/dynamips/switch, via the mixin's slot helpers).
- Unwind failed starts instead of leaking uBridge and the anchor TAPs:
QEMU's stop body runs under try/finally, QEMU and IOU start the datapath
inside the launch try, Dynamips undoes a half-attached port (the retry
used to be short-circuited into a silent black hole), and Docker deletes
the veth pair when the namespace move fails.
- Restore the relay filter guard on IOU (kernel-only filters raise
NodeError, an uncompilable BPF line degrades to a warning), validate the
eBPF/quota/window/bpf filter shapes before touching the bridge (short or
non-numeric values surfaced as 500s after partial state), and refuse a
second NIO on an occupied Docker/QEMU port (the guard IOU and Dynamips
already had).
- Probe fixes: `_probe_bridge_tap` survives a failing uBridge start, and
the probe caches key on ctime too, so a chmod/setcap remedy re-probes.
Controller:
- Parse GNS3_UNIX_SOCKET_NIO like the compute does (line-anchored, truthy
value) and mirror the compute's class selection in kernel_anchor_type.
- Read partial capability reports defensively; make BridgeNIO.bridge
required-but-nullable so an omitted key is a 422 rather than a KeyError.
- Strip the packet_loss correlation slot even when it is zero: the relay
filter takes exactly one argument and rejected `packet_loss 10 0`.
Ethernet switch: skip ports whose absorbed anchor does not exist yet (the
join is deferred by design) and roll the ports_mapping back when the VLAN
reconcile fails, so a retry still diffs against the old mapping.
Agent: reject device config entries without a device_name instead of
silently dropping them (a malformed batch used to execute partially while
reporting success).
Also split the netem builder to clear C901 and drop the two per-file ruff
ignores the PR had added, keeping the remove-only policy.
The rebase onto upstream 3.1 (mypy + ruff I001/F401 waves) left the tree
short of the newly enforced baselines in three ways:
* contextlib / UbridgeError imports dropped as false duplicates during
conflict resolution left NameErrors in iou_vm and qemu_vm (F821);
the Dynamips router grabbed the compute-level NIOTAP instead of the
hypervisor one, breaking TAP anchoring (test failure).
* unused imports (KERNEL_UNSUPPORTED_FILTERS, UbridgeError, List) and
unsorted blocks left behind where the stack's later commits moved the
last usage elsewhere — ruff I001/F401/RUF022 now enforce these.
* mypy, now baseline-free: cache dict annotations in tc_probe, the
locators candidate list, the resolved-params None branch in the MCP
runner, and validate_bpf_syntax keeps the upstream Dict[str, Any]
return (the strict Optional[str] was wrong for the "valid" bool entry).
The e2e raw-frame probe resolves its compiler via shutil.which (S607)
and zips with strict= (B905); the remaining subprocess call is S603 by
nature and gets a per-file ignore like other test files.
ruff check/format clean, mypy at upstream parity (no new errors),
full unit suite 2167 passed.
The bridge module gained delete_nio_tap (uBridge's gns3server-integration
contract, section 'bridge — generic NIO relay with a swappable TAP leg'):
a per-port bridge can swap its topology leg between UDP and a persistent
TAP through stop -> delete -> add -> start, which is what lets an IOL
runner container's port bridge carry a kernel-link anchor.
The probe needs no scratch objects and no capabilities: one command
against a bridge that cannot exist — 202 (unknown command) is an old
build, 214 (bridge doesn't exist) is a new one. Cached by binary identity
like every other probe; any failure reports unknown.
GET /v3/compute/capabilities gains ubridge_bridge_tap; the controller's
default capability dict carries it too (the single schema definition, per
the 1e67fbf12 lesson).
Whether an IOU port can terminate on a persistent TAP (iol_bridge
add_nio_tap) is a capability of its own: the tap module and that command
land independently, so a build may have one without the other. Probed on
a scratch IOL bridge with a scratch TAP — one add/delete cycle, no
iol_bridge start needed (attaching a NIO works on a stopped bridge) —
cached by binary identity, with the scratch bridge id above the per-node
id space the fabric locks (513..1024) so a probe cannot collide with a
running node. Any failure, including an old build's "Unknown command",
means unknown: IOU stays on the relay datapath.
Reported through /capabilities as ubridge_iol_tap, next to ubridge_tap.
Kernel eligibility becomes "both endpoints on one compute, each able to
anchor": Docker always (adapters are born as veth pairs), QEMU when that
compute's uBridge can create the persistent TAPs its adapters anchor on. The
question is asked per compute, because the link needs both ends anchored --
so a mixed or half-upgraded deployment degrades to the relay instead of
failing an attach.
probe_tap_support() creates and deletes one throwaway persistent TAP through a
scratch uBridge, cached by binary identity like the tc report; /capabilities
exposes `ubridge_tap` (absent = unknown, which keeps links on the relay).
The compute route for a QEMU adapter NIO took UDPNIO only, so a kernel link
was rejected with 422: its body and response now accept
Union[UDPNIO, BridgeNIO] exactly like Docker's.
Stale "Docker-to-Docker" wording in the config, link and MCP descriptions now
talks about anchors, and docs/features/qemu-kernel-datapath.md documents the
datapath -- verified end-to-end on a real instance: 32/32 kernel-datapath
checks and 29/29 on the relay variant.
Consume uBridge's ebpf_modes contract (feature/tc-window 40c36ae): a
stateful mode is usable iff ebpf=1 and its token is listed; builds
predating the field keep their shipped modes (nth/quota/flow), so the
pre-correction window semantics can never be installed silently.
- gns3server/utils/tc_capabilities.py: shared reply parser, mode
policy and filter-type mappings (compute and controller gate on the
same rules)
- gns3server/compute/ubridge/tc_probe.py: standalone probe spawning a
throwaway uBridge as the server's own user, cached by binary
identity (path/mtime/size - the version string cannot distinguish
rebuilds); failures cache as unknown
- GET /v3/compute/capabilities gains ubridge_tc {netem, ebpf,
ebpf_modes, cbpf}; the controller forwards it (Compute.capabilities)
and available_filters hides kernel-datapath filter types an endpoint
compute cannot run (both ends apply their own filters, so one
incapable compute hides the type); computes without a report keep
the full list and apply-time 409 stays the guard
- docker: _ubridge_apply_ebpf_drops gates per mode token; the cleanup
path only sends "off" for modes the build declares
- split DockerVM's kernel-datapath machinery (veth lifecycle, carrier,
marker primitives, tc filter translation, kernel NIO teardown) into
compute/docker/docker_kernel_datapath.py (DockerKernelDatapathMixin)
