Kernel eligibility becomes "both endpoints on one compute, each able to
anchor": Docker always (adapters are born as veth pairs), QEMU when that
compute's uBridge can create the persistent TAPs its adapters anchor on. The
question is asked per compute, because the link needs both ends anchored --
so a mixed or half-upgraded deployment degrades to the relay instead of
failing an attach.
probe_tap_support() creates and deletes one throwaway persistent TAP through a
scratch uBridge, cached by binary identity like the tc report; /capabilities
exposes `ubridge_tap` (absent = unknown, which keeps links on the relay).
The compute route for a QEMU adapter NIO took UDPNIO only, so a kernel link
was rejected with 422: its body and response now accept
Union[UDPNIO, BridgeNIO] exactly like Docker's.
Stale "Docker-to-Docker" wording in the config, link and MCP descriptions now
talks about anchors, and docs/features/qemu-kernel-datapath.md documents the
datapath -- verified end-to-end on a real instance: 32/32 kernel-datapath
checks and 29/29 on the relay variant.
Deleting a marker while its node was stopped, then starting the node, recreated
an empty pcap. Root cause: delete_marker_capture removed the uBridge filter and
the pcap file but not the marker spec cached on the port NIO (nio.markers) —
the data source _ubridge_apply_markers reads on node start. The stale spec
reinstalled the marker when uBridge came up.
This was a regression from switching stop_marker off update() (which re-sent
the NIO and implicitly refreshed nio.markers) to the fine-grained
node.delete(/markers/{name}) path.
Fix: make the delete port-aware so the compute can locate the NIO. The DELETE
marker route becomes /adapters/{a}/ports/{p}/markers/{name} across all six
node types; the handler resolves the NIO via get_nio and passes it to
delete_marker_capture, which now pops the marker from nio.markers. get_nio
works regardless of uBridge state, so the stopped-node case is covered. The
controller's stop_marker targets the capture side's adapter/port.
Deleting or updating a marker no longer triggers a full NIO reapply
(reset_packet_filters + re-add), which closed/reopened every sibling
marker's pcap via uBridge. Instead operate on single filters:
- stop_marker: bridge delete_packet_filter + unlink the pcap (works with
the node stopped; filter removal is skipped, the file is still deleted).
- update_marker: bpf/tag/direction → rebuild just that filter (delete + add);
enabled → instant toggle; color/highlight_duration → stored only.
- compute delete_marker_capture / rebuild_marker_filter + per-node routes
(DELETE /markers/{name}, PUT /markers/{name}/rebuild) + MarkerRebuild schema.
IOU overrides _ubridge_delete_marker_filter for iol_bridge; rebuild reuses
the already-overridden add/delete/set, so IOU needs no rebuild override.
The _marker_filter_bridges dict was keyed by marker name alone, so when one
node hosted the same filter name on several links (IUOL-BRIDGE per node with
many bays/units, or a multi-interface router), successive apply calls
overwrote earlier entries. pause_marker_definition then toggled only the last
recorded bridge/location — other copies stayed active and kept emitting.
Key by (name, link_id) so each copy is independent, and iterate all matching
entries in _ubridge_set_marker_filter_state (both generic bridge and IOU
iol_bridge override). Toggle route existence checks also iterate matching
names. Tests updated.
Toggle routes silently no-opped when _marker_filter_bridges lacked the filter
name, so update_marker's enabled-only short-circuit succeeded without toggling
uBridge — the controller-layer enabled was set but the uBridge filter stayed on
and kept emitting signals. Now the toggle routes raise HTTPException 404
(FastAPI handles it directly, no ERROR log); the controller's except catches it
and falls back to self.update() (NIO rebuild, which applies the marker + off).
Wire gns3-server to uBridge's real-time marker controls (contract
../ubridge/doc/gns3server-integration.md §3.2), in three layers:
A. enabled reaches uBridge — _markers_for_node no longer drops disabled
markers controller-side; it carries `enabled` in the NIO spec. apply
installs every marker then issues `enable_packet_filter … off` for the
disabled ones (base_node bridge / iou iol_bridge; old-ubridge errors
downgrade to a warning so a toggle can't break link create).
B. instant per-filter toggle — apply records name→bridge so a new
`_ubridge_set_marker_filter_state` can flip a running filter with
`enable_packet_filter on|off` (iou overrides for iol_bridge + bay/unit).
Each marker-capable node type gains PUT /markers/{name}; update_marker
short-circuits to it when only `enabled` changes (no NIO rebuild, no pcap
flush), falling back to reset+reapply if the route is unavailable.
C. global pause/resume — `_ubridge_marker_pause/resume` send `marker pause`
/ `marker resume` direct to the hypervisor (pause stops signal+pcap,
resume instant, sink retained). Six node-type routes add POST
/markers/pause|resume; project.pause_all/resume_all_markers fan out to
each capture node (deduped, best-effort); REST exposes
POST /projects/{id}/markers/pause|resume.
Toggling enabled and pause/resume are now both instant — only marker create
or a bpf change still go through reset+reapply.
Markers now follow exactly the same apply pattern as packet filters:
state lives in Link._markers, application goes through NIO
(update() -> PUT /nio -> _ubridge_apply_markers). The former
immediate-apply REST endpoints (/markers/start, /markers/stop on
the compute side) and the per-node start_marker/stop_marker methods
are removed — they were a legacy of the original capture-inspired
design and have been superseded by the NIO flow.
Changes:
- controller/udp_link: start_marker/stop_marker/update_marker now
set _markers state + call self.update() (mirrors update_filters).
Removed _marker_capture_nodes runtime dict and its helpers.
- controller/project: _create_link_from_topology_data restores
_markers directly from persisted data (with BPF validation,
like filter reload). No long calls start_marker during load.
- compute: _ubridge_apply_markers swallows BPF compile errors
(warn+skip), matching _ubridge_apply_filters behaviour so a
single bad expression cannot break link creation / node restart.
- Removed: /markers/start,stop endpoints (6 handlers across
vpcs/qemu/docker route files), node start_marker/stop_marker
methods (3 VM files), _ubridge_delete_marker_filter,
_marker_capture_nodes, MarkerDelete schema.
Net: ~280 lines of dead code removed; marker and packet filter now
share a single, unified apply path via the NIO.
Mirror the packet-filter lifecycle: marker specs now live on the NIO
(next to filters), ride in link_data from controller to compute on
every NIO create/update, and are reapplied by _ubridge_apply_markers
in add_ubridge_udp_connection (bridge creation / node restart) and
update_ubridge_udp_connection (NIO update — following the preceding
reset_packet_filters so markers survive filter changes).
Changes:
- NIO / NIOUDP: _markers property + asdict
- schemas/compute/nios.py: UDPNIO.markers field
- base_manager.create_nio: nio.markers from settings
- PUT /nio routes (vpcs/qemu/docker): nio.markers update
- base_node: _ubridge_apply_markers(bridge_name, nio) iterates
nio.markers, computes pcap path, calls _ubridge_add_marker_filter
+ MarkerManager.register; called after _ubridge_apply_filters
- controller udp_link: _get_node_markers + _markers_for_node (route
by capture_node_id); markers in create() and update() link_data
- /markers/start,stop endpoints: mirror spec onto nio.markers so
the marker survives a subsequent node stop/start without a PUT
- tests: add markers field to NIO data expectations
This covers:
- Node restart: NIO persists, add_ubridge_udp_connection re-applies
- Filter update: reset wipes markers, _ubridge_apply_markers re-adds
- Project reload: create() carries markers in link_data → create_nio
- Immediate create: endpoint sets nio.markers immediately
Remove all SPICE WebSocket-related code due to frontend dependency issues
with spice-html5 library (missing RSAKey/BigInteger implementations).
Changes:
- Remove start_spice_websocket_console() from BaseNode
- Remove SPICE WebSocket endpoints from QEMU and Docker compute APIs
- Remove SPICE WebSocket proxy endpoint from controller API
- Remove WebSocket subprotocol handling from authentication layers
- Remove SPICE documentation
The SPICE console type remains functional for direct connections,
but WebSocket proxy support has been removed.
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Add WebSocket-based console support for SPICE protocol, enabling
browser-based graphical console access with enhanced features
like clipboard sharing, USB redirection, and audio streaming.
Changes:
- Add start_spice_websocket_console() method in BaseNode for SPICE
WebSocket to TCP bridging with bidirectional binary forwarding
- Add /console/spice WebSocket endpoints in QEMU and Docker compute APIs
- Add /console/spice WebSocket proxy endpoint in controller API
- Add comprehensive API documentation in docs/features/
Supported console types:
- spice: Basic SPICE protocol support
- spice+agent: SPICE with spice-vdagent for enhanced features
Architecture:
- Browser WebSocket → Controller (JWT + RBAC) → Compute (Basic Auth)
- No external websockify processes required
- Consistent with existing VNC WebSocket implementation
Add VNC console WebSocket endpoints for Docker and QEMU nodes:
- Add /console/vnc WebSocket endpoint to compute API (Docker & QEMU)
- Add /console/vnc WebSocket endpoint to controller API
- Implement start_vnc_websocket_console() in BaseNode
- Forward VNC WebSocket traffic between controller and compute layers
The implementation provides bidirectional WebSocket to TCP forwarding
for VNC protocol (RFB) connections, allowing browser-based VNC console
access to containers and VMs.
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
