Compute:
- Track the anchor that owns uBridge's single AF_PACKET capture slot: a
second kernel port's capture is refused with a clear error (its flag
rolled back), a failed start no longer wedges the port, and only the
owning port's stop issues the process-wide `capture stop_kernel`
(docker/qemu/iou/dynamips/switch, via the mixin's slot helpers).
- Unwind failed starts instead of leaking uBridge and the anchor TAPs:
QEMU's stop body runs under try/finally, QEMU and IOU start the datapath
inside the launch try, Dynamips undoes a half-attached port (the retry
used to be short-circuited into a silent black hole), and Docker deletes
the veth pair when the namespace move fails.
- Restore the relay filter guard on IOU (kernel-only filters raise
NodeError, an uncompilable BPF line degrades to a warning), validate the
eBPF/quota/window/bpf filter shapes before touching the bridge (short or
non-numeric values surfaced as 500s after partial state), and refuse a
second NIO on an occupied Docker/QEMU port (the guard IOU and Dynamips
already had).
- Probe fixes: `_probe_bridge_tap` survives a failing uBridge start, and
the probe caches key on ctime too, so a chmod/setcap remedy re-probes.
Controller:
- Parse GNS3_UNIX_SOCKET_NIO like the compute does (line-anchored, truthy
value) and mirror the compute's class selection in kernel_anchor_type.
- Read partial capability reports defensively; make BridgeNIO.bridge
required-but-nullable so an omitted key is a 422 rather than a KeyError.
- Strip the packet_loss correlation slot even when it is zero: the relay
filter takes exactly one argument and rejected `packet_loss 10 0`.
Ethernet switch: skip ports whose absorbed anchor does not exist yet (the
join is deferred by design) and roll the ports_mapping back when the VLAN
reconcile fails, so a retry still diffs against the old mapping.
Agent: reject device config entries without a device_name instead of
silently dropping them (a malformed batch used to execute partially while
reporting success).
Also split the netem builder to clear C901 and drop the two per-file ruff
ignores the PR had added, keeping the remove-only policy.
The rebase onto upstream 3.1 (mypy + ruff I001/F401 waves) left the tree
short of the newly enforced baselines in three ways:
* contextlib / UbridgeError imports dropped as false duplicates during
conflict resolution left NameErrors in iou_vm and qemu_vm (F821);
the Dynamips router grabbed the compute-level NIOTAP instead of the
hypervisor one, breaking TAP anchoring (test failure).
* unused imports (KERNEL_UNSUPPORTED_FILTERS, UbridgeError, List) and
unsorted blocks left behind where the stack's later commits moved the
last usage elsewhere — ruff I001/F401/RUF022 now enforce these.
* mypy, now baseline-free: cache dict annotations in tc_probe, the
locators candidate list, the resolved-params None branch in the MCP
runner, and validate_bpf_syntax keeps the upstream Dict[str, Any]
return (the strict Optional[str] was wrong for the "valid" bool entry).
The e2e raw-frame probe resolves its compiler via shutil.which (S607)
and zips with strict= (B905); the remaining subprocess call is S603 by
nature and gets a per-file ignore like other test files.
ruff check/format clean, mypy at upstream parity (no new errors),
full unit suite 2167 passed.
The Ethernet switch's kernel fast path: instead of a link crossing the
switch's per-port uBridge relay, the switch absorbs the peer's anchor into
its own kernel bridge. The peer's interface (Docker veth host end, QEMU
TAP, IOU port TAP, Dynamips port TAP) becomes the switch port, and frames
cross anchor -> switch bridge -> switch ports entirely in the kernel.
Wire format: the switch end receives nio_anchor ('join this interface to
my own bridge' — the mirror of nio_bridge), the peer end nio_bridge with a
null bridge ('your anchor is bridged elsewhere': carrier, markers and
impairments only — never bridge membership, and never a bridge delete, on
an interface this node does not own). Anchor names come from the shared
naming contract (utils.kernel_anchor), a pure function of node type, id,
adapter and port — the controller computes the peer's anchor while the
node may be stopped, which is what makes links to stopped nodes wireable.
Stopped peers defer the join; after any node of a link starts
(UDPLink.node_started) the controller re-pushes the switch NIO, and the
switch completes — or repairs, when a peer restart replaced its interface
under the same name — the join against the kernel's actual membership
instead of assuming it.
VLAN changes now edit membership in place: only the ports whose mode/VLAN
actually changed are touched, each losing exactly the previous mode's
entries the new mode does not want (the dot1q admits-all entry is one
range operation in both directions), and no port ever leaves the bridge to
change its VLANs. This replaces the old 'reset by re-enslaving' shortcut
(delif+addif on every wired port, added when the ports were the switch's
own TAPs): on absorbed anchors, re-enslaving an interface owned by another
node is where live testing watched links die — anchors occasionally lost
their bridge membership right after a ports_mapping update (later updates
then failed with delif EINVAL), reproducibly with qemu, IOU and Dynamips
peers and never with Docker's veths.
Eligibility: the switch side needs no capability of its own (its bridge
exists by construction); the peer must be able to anchor. Switch-to-switch
cascades stay on the relay — a kernel interface belongs to one bridge, and
joining two bridges needs a veth pair, deferred.
Verified live on a real server: qemu peers through four VLAN cycles with
both anchors enslaved throughout; a mixed switch (2 IOU + 2 Dynamips, four
kernel ports); Docker peers with real ICMP isolating and recovering (with
both anchors still enslaved); VPCS relay ports likewise in place.
The brctl Ethernet switch runs a per-port uBridge relay, so it can host
the mark filter and packet filters like any uBridge-backed node. Add
ethernet_switch to _MARKER_CAPABLE_TYPES and _get_filter_node, narrow the
UDPLink.update() NIO-PUT skip down to the Dynamips-hosted ethernet_hub,
and expose the matching compute endpoints: PUT nio (filter/marker
reapply) plus the per-marker toggle/pause/resume/delete/rebuild routes.
The ethernet_hub keeps its exclusion: its routes still wire into the
Dynamips hub, which has no uBridge of its own.
Replace the builtin EthernetSwitch stub with a Linux kernel bridge backed
by uBridge's brctl module. Each switch node creates one kernel bridge
(gns3br{N}) with VLAN filtering; each port is a persistent TAP enslaved to
the bridge, relayed by a per-port uBridge bridge (nio_tap <-> nio_udp).
- Access/dot1q/qinq port modes translated to brctl vlan primitives
- Compute router repointed from Dynamips to Builtin manager
- Tests updated: 21 router-level tests + 215 surrounding tests pass
- Real-kernel e2e verified: access 100 PVID untagged, dot1q trunk
VIDs 1-4094 + native 1, qinq 802.1ad proto + 200 PVID
Ethertype 0x9100/0x9200 handling and port-count guard relaxation are
deferred pending resolution.
