Document all 70 configuration fields with pydantic Field
descriptions, ported from the config sample comments and verified
against the actual consumers (allow_remote_console and local had
no documentation anywhere). The descriptions flow into the
OpenAPI schema of GET /v3/settings, giving the Web UI tooltips,
defaults and validation bounds from a single source. Response
models re-declare six path fields as plain strings, which drops
the inherited description — restore them explicitly.
Sync the config sample: document local and allow_remote_console,
drop hardware_virtualization_check which no longer exists in the
schema.
GET returns all settings sections except the deprecated
VirtualBox/VMware ones (Server.Audit privilege); secrets are
masked and Controller.jwt_secret_key is excluded entirely.
PUT applies a partial update (Server.Modify privilege): masked
or empty secrets mean unchanged, null removes the option, the
response carries the new values plus restart_required, and a
settings.updated notification is emitted. New
Server.Audit/Server.Modify privileges are seeded into the
Administrator role at table creation.
Config.update_config() applies submitted options to the main
configuration file via configparser read-modify-write: unknown
options are preserved, null removes an option, the merged view
of all files is validated as ServerConfig before anything is
written (a bad file would kill the FileWatcher polling loop),
and the write is atomic (.tmp + os.replace, mode 0600). Options
whose effective value is owned by a later configuration file
raise ConfigConflictError instead of writing a no-op. The
reload logic is factored into reload_and_notify() and the file
watcher callback is exception-guarded so polling never dies.
Web clients serialize empty form fields as "" while unset values are
stored as None on the node. The bare != diff in the update handler then
sees a phantom change on every full PUT and recreates the container for
nothing -- even when the user only changed a controller-only field such
as netmiko_device_type.
Normalize at the schema boundary ("" -> None for start_command,
environment and extra_hosts; "" -> "/" for console_http_path), make
the setters apply the same canonicalization, and create nodes through
the setters instead of bypassing them in __init__ so both paths store
identical values.
New GET /v3/netmiko/device_types endpoint returns the device types
supported by the netmiko library installed on the server, including
the gns3-copilot custom drivers, so the web UI can populate the
netmiko_device_type dropdown on templates and nodes.
The list is read at runtime from netmiko's ssh_dispatcher.CLASS_MAPPER
registry (the same table ConnectHandler dispatches on), filtered to
drop the '_ssh' aliases and the 'autodetect' pseudo type, and cached
for the process lifetime. Returns 501 when netmiko is not installed
(ai-features extra).
Add default_username/default_password as controller-only node properties
(the netmiko_device_type pattern): they are not sent to the compute,
persist with the project topology and can be updated or cleared per
node. Creating a node from a template seeds them from the template
appliance metadata, and the metadata itself is dropped there so it
never leaks into the node properties.
Appliance fields that describe the appliance (vendor information, default
credentials, installation instructions...) were dropped when installing a
template. Keep them in a new appliance_metadata JSON column on the
templates table, filled by the appliance-to-template conversion for both
registry v1-6 and v8 (version level values override the appliance level
ones). The nested schema allows extra fields so future registry fields
persist without a migration.
- install: resolve the image directory from the version's settings type and
skip image handling for docker appliances; guard appliance.images
- appliance schema: validate template_properties against template_type,
align cpu_throttling with the qemu template, add kvm and version idlepc
- conversion: map IOU image to path, kvm disable to accel=tcg, inherit only
same-type default settings, symbol fallback from the effective category,
template_properties cannot override structural fields
- allow clearing netmiko_device_type with an empty string
- download the template symbol regardless of the level it is defined at and
give qemu guests a default symbol
Both the v1-6 and v8 appliance models accept an optional top-level
netmiko_device_type, and ApplianceToTemplate copies it into the created
template so installed appliances carry the automation hint end to end.
netmiko_device_type follows the CONTROLLER_ONLY_PROPERTIES pattern
(like console_auto_start): a node created from a template inherits the
template value, PUT /nodes can override it inside a topology, updates
never round-trip to the compute, and the value persists in the project
topology file.
Common template field (schema + templates table column + Alembic
migration) holding the Netmiko device type (e.g. 'cisco_xr', 'nokia_srl')
so Netmiko/Nornir based tooling can look up how to reach a node's CLI
without hard-coded vendor mappings. Free-form lowercase string on
purpose: Netmiko's platform list evolves independently of GNS3.
DockerPropertiesV8 now accepts custom_adapters (already available to
v1-6 top-level appliances and to Qemu v8 properties), so port-named
Docker appliances (XRd, SR Linux) can move to the v8 format without
losing their interface naming.
Appliance.type resolves the node type from the v8 settings template_type
(default set first) instead of misclassifying every v8 appliance as
qemu, and _get_default_symbol applies the docker guest symbol to v8
Docker guest appliances.
Nine fixes from a review of the docker-shm-devices diff:
* GNS3_STOP_TIMEOUT >300 s aborted at the manager's default HTTP timeout
before Docker finished the stop — the stop query now gets a timeout
with a margin over the grace period.
* Overlapping bind targets (GNS3_MASK_UDEV + GNS3_MASK_SYSTEMD on the
same unit, a unit named twice, an extra_configs target equal to a
masked unit) made Docker reject the create with 'Duplicate mount
point' — Mounts are deduplicated by target.
* ExtraConfig.target now carries a pydantic validator (absolute file
path, no '..'), so bad targets 422 at template-save time instead of
failing at node-create time after a multi-GB image pull; directory
forms ('/', '/etc/') are also rejected by the runtime guard instead
of raising IsADirectoryError (raw 500).
* _check_host_readiness skipped every remaining check when one
/proc/sys key was unreadable (mid-loop return) — now continues.
* The base-class GNS3_* env parser strips trailing commas like the
vendor parser, so 'GNS3_MASK_UDEV=1,' composed from a list still
activates.
* Vendor env knobs are re-parsed on every create(), so a PUT to the
node's environment takes effect on the next (re)create.
* The graceful SIGTERM stop is now limited to the explicit user stop
route; delete/update/close/crash-cleanup keep the immediate kill
(those paths force-delete or recreate the container right after).
* An extra_configs target beneath a persisted volume is shadowed by the
volume bind — warn at create time.
Add an `extra_configs` field (list of {target, content}) to the docker
node/template/appliance schemas. For each entry GNS3 writes `content` to a
file in the node working directory and bind-mounts it read-only at `target`
inside the container.
This lets a NOS appliance seed its startup config without rebuilding the
image: XRd points XR_FIRST_BOOT_CONFIG at an injected /firstboot.cfg, FRR at
/etc/frr/frr.conf, etc. The bind is a single-file mount applied at create
time, so it works for both the generic init.sh path and vendor nodes that
skip init.sh (console_type=docker_exec). Entries are only injected when
present, so ordinary nodes are unaffected.
The content can't go through `environment` (it is line-delimited, one var per
line), hence a dedicated field -- the same plumbing shape as extra_volumes.
The top-level ApplianceV1_6 model declared first_port_name /
port_name_format / port_segment_size but not custom_adapters, so the
GET /appliances endpoint (response_model=schemas.Appliance) stripped
custom_adapters from the response — the frontend never saw per-adapter
port names even though the appliance file and the server-side template
conversion (appliance_to_template reads it from the raw dict) handled it.
Add custom_adapters: Optional[List[CustomAdapterItem]] to ApplianceV1_6
so the field round-trips through the API. (ApplianceV8 already models it
inside its TemplateSetting.)
The Docker appliance Pydantic model (DockerConsoleType) rejected
console_type='docker_exec', so an appliance file using the vendor NOS
docker_exec console could not be loaded (validation error at import).
Add docker_exec to the enum — it is already a valid ConsoleType
(schemas/common.py) and is handled by VendorDockerVM.
Project open used to create each link by issuing two NIO POSTs from the
controller to the compute — ~5000 HTTP round-trips for a 2500-link
topology, all funnelling through the single shared controller/compute
event loop and capping throughput near 12 links/s.
Replace it with a bulk path:
- UDPLink split into _prepare() (local: ports, peer addrs, link_data)
and _commit_nios() (dispatch). create() = prepare + commit (interactive).
- Link.add_node gains batch=True: attach both nodes without triggering
per-link NIO HTTP.
- compute: new POST /projects/{id}/nios/batch endpoint with a unified
_add_nio_binding dispatch across node types (docker/qemu/iou/vpcs/
builtin differ in signature).
- project.open: prepare all links locally, group NIO entries by compute,
send each compute a single /nios/batch, then finalise (wire node/port
refs, mark created, notify, apply marker defs) in parallel.
Cuts controller->compute HTTP from O(links) to O(computes). Test added
for the batch endpoint.
Markers now work on serial links (Cisco HDLC / PPP / Frame Relay / ATM), not just Ethernet. A marker carries a data_link_type (default DLT_EN10MB); at the uBridge boundary it becomes the 'mark ... linktype <dlt>' keyword so the BPF compiles and the pcap is written with the matching link-layer.
- MarkerCreate / MarkerDefinitionCreate gain data_link_type (default DLT_EN10MB). Per-link it is create-only; definitions are updatable (a change re-fans-out).
- base_node._marker_linktype() normalizes the GNS3 DLT name (strip DLT_, uppercase, None for EN10MB). Single source is SerialPort.data_link_types, so Cisco PPP -> PPP_SERIAL (50), matching the capture path -- no second mapping table.
- _ubridge_add_marker_filter (generic) and the IOU marker loop append 'linktype <dlt>'.
- Definition fan-out branches on link_type in inherit_marker: Ethernet is always EN10MB; a serial link uses the definition's WAN encapsulation, or is SKIPPED when none was chosen (an EN10MB pcap on serial is undecodable). One definition covers a mixed topology.
- MCP marker_definition exposes data_link_type (None = not forwarded).
- No uBridge rebuild on a data_link_type change -- only that one marker's filter is swapped (delete + re-add), mirroring a BPF change; reset_packet_filters preserves sibling mark filters.
Requires the uBridge build with 'mark ... linktype' support.
Switch ubridge_control_transport from tcp (-H) to unix (-U), the
AF_UNIX + SO_PEERCRED channel recommended on Linux for kernel-level
peer authentication. tcp is retained as an opt-in for backward
compatibility. Existing deployments that set the key explicitly are
unaffected; only fresh installs / unset keys pick up the new default.
128 characters was far beyond any realistic marker label (icmp, arp, tcp-syn)
and would have collided with the pcap filename budget once a tag prefix is
added later. Cap the user-facing name at 32 in both MarkerCreate and
MarkerDefinitionCreate; the compute-side name guard now also rejects names
longer than 48, which covers the `global-{def_name}` inherited form (≤ 39).
Deleting or updating a marker no longer triggers a full NIO reapply
(reset_packet_filters + re-add), which closed/reopened every sibling
marker's pcap via uBridge. Instead operate on single filters:
- stop_marker: bridge delete_packet_filter + unlink the pcap (works with
the node stopped; filter removal is skipped, the file is still deleted).
- update_marker: bpf/tag/direction → rebuild just that filter (delete + add);
enabled → instant toggle; color/highlight_duration → stored only.
- compute delete_marker_capture / rebuild_marker_filter + per-node routes
(DELETE /markers/{name}, PUT /markers/{name}/rebuild) + MarkerRebuild schema.
IOU overrides _ubridge_delete_marker_filter for iol_bridge; rebuild reuses
the already-overridden add/delete/set, so IOU needs no rebuild override.
update_marker reused MarkerCreate, whose bpf is required, so a partial PUT like
{"enabled": false} was rejected with 422 "bpf field required". Add a MarkerUpdate
schema with every field optional (bpf included; capture_node_id and name are
create-only/path-driven and omitted) and use it for the PUT route — partial
updates now validate cleanly.
Wire gns3-server to uBridge's real-time marker controls (contract
../ubridge/doc/gns3server-integration.md §3.2), in three layers:
A. enabled reaches uBridge — _markers_for_node no longer drops disabled
markers controller-side; it carries `enabled` in the NIO spec. apply
installs every marker then issues `enable_packet_filter … off` for the
disabled ones (base_node bridge / iou iol_bridge; old-ubridge errors
downgrade to a warning so a toggle can't break link create).
B. instant per-filter toggle — apply records name→bridge so a new
`_ubridge_set_marker_filter_state` can flip a running filter with
`enable_packet_filter on|off` (iou overrides for iol_bridge + bay/unit).
Each marker-capable node type gains PUT /markers/{name}; update_marker
short-circuits to it when only `enabled` changes (no NIO rebuild, no pcap
flush), falling back to reset+reapply if the route is unavailable.
C. global pause/resume — `_ubridge_marker_pause/resume` send `marker pause`
/ `marker resume` direct to the hypervisor (pause stops signal+pcap,
resume instant, sink retained). Six node-type routes add POST
/markers/pause|resume; project.pause_all/resume_all_markers fan out to
each capture node (deduped, best-effort); REST exposes
POST /projects/{id}/markers/pause|resume.
Toggling enabled and pause/resume are now both instant — only marker create
or a bpf change still go through reset+reapply.
A marker is single-sided — only the chosen capture node's uBridge installs the
mark filter — and dir=tx|rx is interpreted from that node's perspective. Until
now the observer was always auto-picked (_choose_marker_side), so dir=tx meant
"the auto-chosen endpoint is sending", which is unpredictable and makes the
direction filter hard to render meaningfully in the Web UI.
Add an optional create-only capture_node_id to MarkerCreate: when set, the
marker is pinned to that endpoint's uBridge (validated as a link endpoint and a
marker-capable type); when omitted, behavior is unchanged (auto-pick). The
chosen id is already echoed back as capture_node_id and in MARK signals, so the
UI can always render the observer regardless of who picked it.
capture_node_id is create-only (changing it would silently flip the meaning of
stored direction; recreate instead) and is not accepted on project-level
definitions — they are link-agnostic and have no endpoints, so inherited
markers keep auto-picking per link.
Plumbed through REST create_marker, the MCP link_marker tool, and base
Link.start_marker. update_marker does not forward it.
Direction field in marker.match events
=======================================
Read ubridge dir=<tx|rx> from MARK signal datagrams and forward it
as a "dir" key in the marker.match notification event. The field is
additive -- older ubridge builds omit it and the parser leaves it null,
so consumers fall back to undirected rendering with no version coupling.
Semantics are relative to the capture node (the signal's node=<id>):
tx = capture node is sending (ingressed device-side NIO), rx = it is
receiving (ingressed link-side NIO).
Per-marker direction filter (opt-in, server-side pipeline)
==========================================================
Add a direction field to MarkerCreate and MarkerDefinitionCreate
schemas ("tx" | "rx" | null). Plumb it through the full pipeline:
Schema -> controller (start_marker/update_marker, marker_entry,
_markers_for_node, update_marker_definition sync)
-> REST/MCP handlers -> compute _ubridge_add_marker_filter +
IOU _ubridge_apply_markers -> bridge add_packet_filter dir <tx|rx>
When set, ubridge only fires the mark handler (signal + pcap) for
packets matching the chosen direction. null (default/legacy) = both
directions -- zero behavioural change for existing markers.
Docs and tests
==============
- docs/features/marker-traffic-insight.md: signal format updated,
new Direction section with NIO mapping, arrow mapping, and additive
compatibility note.
- tests/compute/marker/test_marker_manager.py: 3 new parser tests
(dir tx/rx/absent) plus existing test extended to assert dir=None.
13 files, +123/-22, 72 tests pass (zero breakage)
Add ubridge_control_transport to [Server] config (default "tcp", fully
backward compatible). Selecting "unix" switches the uBridge hypervisor
control channel from the unauthenticated TCP listener (-H) to an AF_UNIX
socket (-U) authenticated in-kernel via SO_PEERCRED.
- UBridgeHypervisor: supports both socket_path (AF_UNIX) and host/port
(TCP); a new `endpoint` property unifies log/error strings for both
- Hypervisor: unix mode allocates a short socket path under a 0700
private runtime dir and unlinks it on stop; tcp mode restores the
original getaddrinfo ephemeral-port allocation
- base_node: reads the transport from config and passes host through
- schemas/config.py + config_samples/gns3_server.conf: new option
Default deployments are unchanged. "unix" requires a ubridge build that
understands -U.
The global-prefix reservation belongs on the create path, where it keeps
user-chosen names disjoint from inherited global-{name} markers. It was
implemented as a field_validator on MarkerCreate / MarkerDefinitionCreate,
which also back the PUT update bodies — so updating an inherited marker
while echoing its name in the body tripped the validator with a generic
422 before the controller could return the actionable 409 ("inherited,
use the marker-definitions API").
Drop the schema validators and enforce the prefix in the two create routes
(ControllerError -> 409). PUT no longer validates the body name (ignored
anyway — the target is the {name} path param), so editing an inherited
marker now reaches the controller's inheritance guard and returns the
clear 409. The name-format regex stays on the schema (still 422).
Per-marker UI hint (milliseconds, ge=1) for how long the Web UI keeps a
marker highlighted after a match. Mirrors color: stored on the link,
persisted in the topology, inherited via project-level definitions, and
never sent to uBridge. Omitted = null = frontend uses its own default.
The default is intentionally NOT set in the schema: MarkerCreate also
backs PUT updates, so a schema default would make every partial update
silently reset the value. None means "not provided" (keep existing on
update / frontend decides on create).
pydantic_core (Rust engine) does not support regex look-around.
Keep the character-class pattern for basic safety and enforce the
"global" prefix reservation via a field_validator instead.
Project-level marker definitions fan out to every link (existing and new).
A definition is stored once on Project._marker_definitions; when applied to
a link the marker is named "global-{def_name}" — the "global" prefix was
pre-reserved in the schema, so inherited and per-link markers can never
collide, nor will their registry keys.
Key behavior:
- POST /projects/{pid}/marker-definitions → fan out to all existing links
- PUT /projects/{pid}/marker-definitions/{name} → sync all inherited copies
- DELETE → remove every inherited copy from every link
- New links auto-inherit all active defs (hook in UDPLink.create)
- Per-link DELETE/PUT of a "global-*" marker is rejected (409)
- Inherited markers are NOT persisted in the topology; they are re-created
from _marker_definitions on project load
- Compute side is untouched — the marker reaches uBridge via the existing
start_marker→update→NIO→ubridge pipeline
Files:
- controller/project.py — _marker_definitions + CRUD + fanout + topology load
- controller/link.py — Link.inherit_marker() + asdict() filter
- controller/udp_link.py — guards on stop/update + create() inheritance hook
- controller/topology.py — persist marker_definitions in project topology
- schemas/controller/links.py — MarkerDefinitionCreate schema
- api/routes/controller/projects.py — REST endpoints (marker-definitions)
Add a name pattern constraint to MarkerCreate schema (alphanumeric +
_.-) to prevent injection into uBridge commands, with a matching
defense-in-depth check in _ubridge_add_marker_filter for hand-edited
topology files. Also add the missing "enabled" field to MarkerCreate
and pass it through the PUT route so the documented toggle actually
works.
Markers now follow exactly the same apply pattern as packet filters:
state lives in Link._markers, application goes through NIO
(update() -> PUT /nio -> _ubridge_apply_markers). The former
immediate-apply REST endpoints (/markers/start, /markers/stop on
the compute side) and the per-node start_marker/stop_marker methods
are removed — they were a legacy of the original capture-inspired
design and have been superseded by the NIO flow.
Changes:
- controller/udp_link: start_marker/stop_marker/update_marker now
set _markers state + call self.update() (mirrors update_filters).
Removed _marker_capture_nodes runtime dict and its helpers.
- controller/project: _create_link_from_topology_data restores
_markers directly from persisted data (with BPF validation,
like filter reload). No long calls start_marker during load.
- compute: _ubridge_apply_markers swallows BPF compile errors
(warn+skip), matching _ubridge_apply_filters behaviour so a
single bad expression cannot break link creation / node restart.
- Removed: /markers/start,stop endpoints (6 handlers across
vpcs/qemu/docker route files), node start_marker/stop_marker
methods (3 VM files), _ubridge_delete_marker_filter,
_marker_capture_nodes, MarkerDelete schema.
Net: ~280 lines of dead code removed; marker and packet filter now
share a single, unified apply path via the NIO.
Add a user-chosen hex color (e.g. '#ff5722') to each marker, stored in
Link._markers alongside bpf/tag/enabled. The color:
- Is serialized with the link (asdict) and persisted in the topology, so
it survives project reload and is consistent across devices.
- Never reaches uBridge (compute ignores it) — it is purely a Web UI
concern.
- Can be updated independently of the BPF (color-only changes skip the
ubridge round-trip).
MarkerCreate schema gains color: Optional[str]; start_marker and
update_marker carry it through; REST create/update endpoints pass it.
The marker.match WebSocket event stays lean (no color) — the Web UI maps
filter -> color from the link state it already holds.
Mirror the packet-filter lifecycle: marker specs now live on the NIO
(next to filters), ride in link_data from controller to compute on
every NIO create/update, and are reapplied by _ubridge_apply_markers
in add_ubridge_udp_connection (bridge creation / node restart) and
update_ubridge_udp_connection (NIO update — following the preceding
reset_packet_filters so markers survive filter changes).
Changes:
- NIO / NIOUDP: _markers property + asdict
- schemas/compute/nios.py: UDPNIO.markers field
- base_manager.create_nio: nio.markers from settings
- PUT /nio routes (vpcs/qemu/docker): nio.markers update
- base_node: _ubridge_apply_markers(bridge_name, nio) iterates
nio.markers, computes pcap path, calls _ubridge_add_marker_filter
+ MarkerManager.register; called after _ubridge_apply_filters
- controller udp_link: _get_node_markers + _markers_for_node (route
by capture_node_id); markers in create() and update() link_data
- /markers/start,stop endpoints: mirror spec onto nio.markers so
the marker survives a subsequent node stop/start without a PUT
- tests: add markers field to NIO data expectations
This covers:
- Node restart: NIO persists, add_ubridge_udp_connection re-applies
- Filter update: reset wipes markers, _ubridge_apply_markers re-adds
- Project reload: create() carries markers in link_data → create_nio
- Immediate create: endpoint sets nio.markers immediately
Change the marker UDP sink default from port=0 (OS-chosen) to 3070 for
predictable firewall/debugging/monitoring.
Add marker_listen_host and marker_listen_port with documentation to
config_samples/gns3_server.conf and scripts/gns3_server.conf.
- Change `status: str` to `status: InterfaceStatus` (str Enum) in the
HostInterface schema, matching the existing IPAddressFamily pattern.
- Use default-then-override pattern in interfaces() to eliminate the
`else` branch and deduplicate defaults.
Each host interface surfaced by the cloud node now reports:
- ip_addresses: every IPv4 and IPv6 address (previously only a single
IPv4 was collected internally and then dropped before the response)
- status / speed / mtu / flags: operational state and link attributes
sourced from psutil.net_if_stats(), with flags normalized to a list
The legacy ip_address / netmask / mac_address fields are preserved so
existing callers (compute link detection, GNS3 VM, VMware, has_netmask)
keep working. The new fields travel through the existing interfaces
payload that the controller forwards verbatim, so no controller-side
change is required and the PUT / ports_mapping flow is unaffected.
- New config: Controller.jwt_refresh_token_expire_minutes (default 30 days)
- New endpoint: POST /v3/access/users/refresh (public, unauthenticated)
- Login/authenticate responses now include refresh_token
- AuthService: _create_token helper, create_refresh_token, get_token_data
now parses type claim (token_use) for token classification
- Security: refresh tokens rejected on HTTP + WebSocket access paths;
/refresh strictly requires type=='refresh'
- Logout works for free via existing token_version mechanism
- Tests: 9 new TestRefreshToken cases, all passing; 34 existing tests
still pass (no regressions)
- New db model: api_keys table with bcrypt-hashed keys
- New API: POST/GET/DELETE /v3/access/api-keys endpoints
- MCP _resolve_token: validates API keys, resolves to 5-min JWT
- API keys inherit the creating user's RBAC permissions
- MCP auth supports both JWT (24h) and API key (permanent) tokens
- Stream file GET/POST through controller without buffering in memory
- Add recursive and subdirectory filtering to node file listing
- Replace file extension with magic-based file type detection
- Add DELETE endpoint for node and project files
- Include directories in listing response
- Add params and stream support to http_query
- Fix lambda closures, streamer exception scope, and delete error codes
The MCP library's TransportSecurityMiddleware only supports exact host
matches or "host:*" port wildcards. It does NOT support a standalone "*"
wildcard to mean "allow all hosts" — setting allowed_hosts=["*"] would
reject every connection because no Host header equals "*".
Worse, when transport_security=None was passed to FastMCP while its default
host is "127.0.0.1", FastMCP would auto-enable protection with strict
localhost-only rules, overriding GNS3's intent to allow all hosts.
Root cause analysis:
- FastMCP auto-enables DNS rebinding protection when host is localhost
and no explicit TransportSecuritySettings is provided
- GNS3 was passing transport_security=None (indirectly via FastMCP's default)
when protection was disabled, triggering the auto-enable
- The TransportSecuritySettings "allowed_hosts" list does NOT support "*"
as a catch-all wildcard
This fix:
1. Always pass an explicit TransportSecuritySettings to FastMCP
- Disabled: TransportSecuritySettings(enable_dns_rebinding_protection=False)
- Enabled: TransportSecuritySettings(enable_dns_rebinding_protection=True, ...)
2. Restore mcp_allowed_hosts and mcp_allowed_origins config fields
3. Set mcp_enable_dns_rebinding_protection default to False (allow all hosts)
Behaviour:
- Default (no config change): all hosts can connect to MCP server
- With mcp_enable_dns_rebinding_protection=true: only configured hosts
- Aligns with GNS3 server's 0.0.0.0 binding policy
Add MCP transport security configuration to gns3_server.conf with permissive
defaults that align with GNS3's design philosophy and VM distribution requirements.
## Changes
### 1. Configuration Schema (gns3server/schemas/config.py)
- Added MCP transport security fields to ServerSettings class:
- mcp_enable_dns_rebinding_protection (bool, default: True)
- mcp_allowed_hosts (list[str], default: ["*"])
- mcp_allowed_origins (list[str], default: ["*"])
- Added field validators to handle comma-separated string input
### 2. MCP Server Initialization (gns3server/api/routes/mcp/__init__.py)
- Import TransportSecuritySettings from mcp.server.transport_security
- Added _create_mcp_server() function to read configuration
- Updated FastMCP instantiation to use configured security settings
### 3. Configuration Sample (gns3server/config_samples/gns3_server.conf)
- Added MCP transport security settings section
- Documented default behavior and security options
- Provided examples for different use cases
## Design Philosophy
**Default: Allow All Hosts** (matches GNS3's 0.0.0.0 binding):
- VM distribution works out-of-the-box
- Users can access from any network location
- Security-conscious users can restrict when needed
**Security: Optional Restriction**:
Users can configure specific hosts for enhanced security:
``ini
mcp_allowed_hosts = 127.0.0.1:*,localhost:*,192.168.1.3:*
mcp_allowed_origins = http://127.0.0.1:*,http://localhost:*,http://192.168.1.3:*
```
## Benefits
- Flexible: Users can configure based on security requirements
- User-friendly: Default matches GNS3's 0.0.0.0 binding philosophy
- Maintainable: No code changes needed for different deployment scenarios
- Secure: DNS rebinding protection remains enabled with configurable hosts
## Related
- Issue #2771
- FastMCP DNS rebinding protection design
- Existing skills configuration in ServerSettings
