Docker node stop took ~5s every time. The stop API grace period
(params t=5, unchanged since 2015) was always exhausted: the business
process (often an interactive shell) ignores SIGTERM, and GNS3 doesn't
depend on graceful shutdown — _fix_permissions and /gns3volumes already
persist container state before stop() is called.
Use POST /containers/{id}/kill (SIGKILL, zero delay) instead of stop.
The 409 (container already stopped) replaces the previous 304 handling
for the race where the container exits between the state check and the call.
t=5 traced to commit 33edbefa3 (2015-10-14) "Docker cleanup and
improvements" — introduced with no recorded rationale.
Markers now work on serial links (Cisco HDLC / PPP / Frame Relay / ATM), not just Ethernet. A marker carries a data_link_type (default DLT_EN10MB); at the uBridge boundary it becomes the 'mark ... linktype <dlt>' keyword so the BPF compiles and the pcap is written with the matching link-layer.
- MarkerCreate / MarkerDefinitionCreate gain data_link_type (default DLT_EN10MB). Per-link it is create-only; definitions are updatable (a change re-fans-out).
- base_node._marker_linktype() normalizes the GNS3 DLT name (strip DLT_, uppercase, None for EN10MB). Single source is SerialPort.data_link_types, so Cisco PPP -> PPP_SERIAL (50), matching the capture path -- no second mapping table.
- _ubridge_add_marker_filter (generic) and the IOU marker loop append 'linktype <dlt>'.
- Definition fan-out branches on link_type in inherit_marker: Ethernet is always EN10MB; a serial link uses the definition's WAN encapsulation, or is SKIPPED when none was chosen (an EN10MB pcap on serial is undecodable). One definition covers a mixed topology.
- MCP marker_definition exposes data_link_type (None = not forwarded).
- No uBridge rebuild on a data_link_type change -- only that one marker's filter is swapped (delete + re-add), mirroring a BPF change; reset_packet_filters preserves sibling mark filters.
Requires the uBridge build with 'mark ... linktype' support.
Deleting a marker while its node was stopped, then starting the node, recreated
an empty pcap. Root cause: delete_marker_capture removed the uBridge filter and
the pcap file but not the marker spec cached on the port NIO (nio.markers) —
the data source _ubridge_apply_markers reads on node start. The stale spec
reinstalled the marker when uBridge came up.
This was a regression from switching stop_marker off update() (which re-sent
the NIO and implicitly refreshed nio.markers) to the fine-grained
node.delete(/markers/{name}) path.
Fix: make the delete port-aware so the compute can locate the NIO. The DELETE
marker route becomes /adapters/{a}/ports/{p}/markers/{name} across all six
node types; the handler resolves the NIO via get_nio and passes it to
delete_marker_capture, which now pops the marker from nio.markers. get_nio
works regardless of uBridge state, so the stopped-node case is covered. The
controller's stop_marker targets the capture side's adapter/port.
_ubridge_apply_markers now installs only markers not already on the bridge
(uBridge's reset_packet_filters preserves mark filters), so an NIO update no
longer re-adds — and reopens — sibling markers' pcaps. _stop_ubridge clears
_marker_filter_bridges so a node restart re-installs everything (the map would
otherwise keep stale entries pointing at a fresh, empty uBridge).
Deleting or updating a marker no longer triggers a full NIO reapply
(reset_packet_filters + re-add), which closed/reopened every sibling
marker's pcap via uBridge. Instead operate on single filters:
- stop_marker: bridge delete_packet_filter + unlink the pcap (works with
the node stopped; filter removal is skipped, the file is still deleted).
- update_marker: bpf/tag/direction → rebuild just that filter (delete + add);
enabled → instant toggle; color/highlight_duration → stored only.
- compute delete_marker_capture / rebuild_marker_filter + per-node routes
(DELETE /markers/{name}, PUT /markers/{name}/rebuild) + MarkerRebuild schema.
IOU overrides _ubridge_delete_marker_filter for iol_bridge; rebuild reuses
the already-overridden add/delete/set, so IOU needs no rebuild override.
The _marker_filter_bridges dict was keyed by marker name alone, so when one
node hosted the same filter name on several links (IUOL-BRIDGE per node with
many bays/units, or a multi-interface router), successive apply calls
overwrote earlier entries. pause_marker_definition then toggled only the last
recorded bridge/location — other copies stayed active and kept emitting.
Key by (name, link_id) so each copy is independent, and iterate all matching
entries in _ubridge_set_marker_filter_state (both generic bridge and IOU
iol_bridge override). Toggle route existence checks also iterate matching
names. Tests updated.
- compute (test_base_node.py): set_marker_filter_state on/off command,
marker pause/resume command, and apply issues enable_packet_filter off
for a disabled marker (+ records the name->bridge map).
- controller (test_marker.py): _markers_for_node keeps disabled markers
and carries enabled; update_marker enabled-only hits the toggle route
(not NIO rebuild) while a bpf change still rebuilds; pause/resume fan
out to capture nodes.
Direction field in marker.match events
=======================================
Read ubridge dir=<tx|rx> from MARK signal datagrams and forward it
as a "dir" key in the marker.match notification event. The field is
additive -- older ubridge builds omit it and the parser leaves it null,
so consumers fall back to undirected rendering with no version coupling.
Semantics are relative to the capture node (the signal's node=<id>):
tx = capture node is sending (ingressed device-side NIO), rx = it is
receiving (ingressed link-side NIO).
Per-marker direction filter (opt-in, server-side pipeline)
==========================================================
Add a direction field to MarkerCreate and MarkerDefinitionCreate
schemas ("tx" | "rx" | null). Plumb it through the full pipeline:
Schema -> controller (start_marker/update_marker, marker_entry,
_markers_for_node, update_marker_definition sync)
-> REST/MCP handlers -> compute _ubridge_add_marker_filter +
IOU _ubridge_apply_markers -> bridge add_packet_filter dir <tx|rx>
When set, ubridge only fires the mark handler (signal + pcap) for
packets matching the chosen direction. null (default/legacy) = both
directions -- zero behavioural change for existing markers.
Docs and tests
==============
- docs/features/marker-traffic-insight.md: signal format updated,
new Direction section with NIO mapping, arrow mapping, and additive
compatibility note.
- tests/compute/marker/test_marker_manager.py: 3 new parser tests
(dir tx/rx/absent) plus existing test extended to assert dir=None.
13 files, +123/-22, 72 tests pass (zero breakage)
The condition 'state != "stopped" or state != "exited"' is a tautology,
so the state check was a no-op and a stop request was sent even for a
container that had already exited.
_get_container_state() never returns "stopped" (only "running",
"paused" or "exited"), so the intended negation of the condition used in
_fix_permissions() requires 'and', not 'or' (De Morgan's law).
Added a regression test asserting no stop query is issued for an
already-exited container.
NAT now includes an 'interfaces' field in its response, filtered to
contain only the mapped NAT interface (virbr0 on Linux, vmnet8 on
macOS/Windows). This lets connected nodes discover the NAT subnet
and gateway address without needing to list all host interfaces.
The field format mirrors Cloud.asdict(): name, type, special, and
ip_addresses list (both IPv4 and IPv6).
A uBridge MARK signal carries only node= and filter= (no bridge/link field), so when one node is the capture side for several links that share a marker name (always the case for global-{name} definitions on a multi-interface node) the signals were indistinguishable and the (node, filter) registry collapsed them to a single link.
The mark filter is now stamped with its link id (mark <bpf> ... link <link_id>); uBridge echoes it verbatim (link=<link_id>) and the listener uses the signal's link= as the authoritative link_id of the marker.match event, falling back to the registry only for legacy signals without it. base_node and iou apply paths pass link_id; covered by two new listener tests.
Each host interface surfaced by the cloud node now reports:
- ip_addresses: every IPv4 and IPv6 address (previously only a single
IPv4 was collected internally and then dropped before the response)
- status / speed / mtu / flags: operational state and link attributes
sourced from psutil.net_if_stats(), with flags normalized to a list
The legacy ip_address / netmask / mac_address fields are preserved so
existing callers (compute link detection, GNS3 VM, VMware, has_netmask)
keep working. The new fields travel through the existing interfaces
payload that the controller forwards verbatim, so no controller-side
change is required and the PUT / ports_mapping flow is unaffected.
