The rebase onto upstream 3.1 (mypy + ruff I001/F401 waves) left the tree
short of the newly enforced baselines in three ways:
* contextlib / UbridgeError imports dropped as false duplicates during
conflict resolution left NameErrors in iou_vm and qemu_vm (F821);
the Dynamips router grabbed the compute-level NIOTAP instead of the
hypervisor one, breaking TAP anchoring (test failure).
* unused imports (KERNEL_UNSUPPORTED_FILTERS, UbridgeError, List) and
unsorted blocks left behind where the stack's later commits moved the
last usage elsewhere — ruff I001/F401/RUF022 now enforce these.
* mypy, now baseline-free: cache dict annotations in tc_probe, the
locators candidate list, the resolved-params None branch in the MCP
runner, and validate_bpf_syntax keeps the upstream Dict[str, Any]
return (the strict Optional[str] was wrong for the "valid" bool entry).
The e2e raw-frame probe resolves its compiler via shutil.which (S607)
and zips with strict= (B905); the remaining subprocess call is S603 by
nature and gets a per-file ignore like other test files.
ruff check/format clean, mypy at upstream parity (no new errors),
full unit suite 2167 passed.
The bridge module gained delete_nio_tap (uBridge's gns3server-integration
contract, section 'bridge — generic NIO relay with a swappable TAP leg'):
a per-port bridge can swap its topology leg between UDP and a persistent
TAP through stop -> delete -> add -> start, which is what lets an IOL
runner container's port bridge carry a kernel-link anchor.
The probe needs no scratch objects and no capabilities: one command
against a bridge that cannot exist — 202 (unknown command) is an old
build, 214 (bridge doesn't exist) is a new one. Cached by binary identity
like every other probe; any failure reports unknown.
GET /v3/compute/capabilities gains ubridge_bridge_tap; the controller's
default capability dict carries it too (the single schema definition, per
the 1e67fbf12 lesson).
The Ethernet switch's kernel fast path: instead of a link crossing the
switch's per-port uBridge relay, the switch absorbs the peer's anchor into
its own kernel bridge. The peer's interface (Docker veth host end, QEMU
TAP, IOU port TAP, Dynamips port TAP) becomes the switch port, and frames
cross anchor -> switch bridge -> switch ports entirely in the kernel.
Wire format: the switch end receives nio_anchor ('join this interface to
my own bridge' — the mirror of nio_bridge), the peer end nio_bridge with a
null bridge ('your anchor is bridged elsewhere': carrier, markers and
impairments only — never bridge membership, and never a bridge delete, on
an interface this node does not own). Anchor names come from the shared
naming contract (utils.kernel_anchor), a pure function of node type, id,
adapter and port — the controller computes the peer's anchor while the
node may be stopped, which is what makes links to stopped nodes wireable.
Stopped peers defer the join; after any node of a link starts
(UDPLink.node_started) the controller re-pushes the switch NIO, and the
switch completes — or repairs, when a peer restart replaced its interface
under the same name — the join against the kernel's actual membership
instead of assuming it.
VLAN changes now edit membership in place: only the ports whose mode/VLAN
actually changed are touched, each losing exactly the previous mode's
entries the new mode does not want (the dot1q admits-all entry is one
range operation in both directions), and no port ever leaves the bridge to
change its VLANs. This replaces the old 'reset by re-enslaving' shortcut
(delif+addif on every wired port, added when the ports were the switch's
own TAPs): on absorbed anchors, re-enslaving an interface owned by another
node is where live testing watched links die — anchors occasionally lost
their bridge membership right after a ports_mapping update (later updates
then failed with delif EINVAL), reproducibly with qemu, IOU and Dynamips
peers and never with Docker's veths.
Eligibility: the switch side needs no capability of its own (its bridge
exists by construction); the peer must be able to anchor. Switch-to-switch
cascades stay on the relay — a kernel interface belongs to one bridge, and
joining two bridges needs a veth pair, deferred.
Verified live on a real server: qemu peers through four VLAN cycles with
both anchors enslaved throughout; a mixed switch (2 IOU + 2 Dynamips, four
kernel ports); Docker peers with real ICMP isolating and recovering (with
both anchors still enslaved); VPCS relay ports likewise in place.
Dynamips links can now ride the kernel datapath like Docker, QEMU and IOU:
each Ethernet slot/port gets a persistent TAP anchor (gd{id}e{slot}p{port}),
created through uBridge's tap module, and the Dynamips hypervisor opens it
with nio create_tap — the hypervisor holds the fd, exactly QEMU's shape.
Links attach the anchor to their per-link kernel bridge; the legacy UDP
tunnel remains the relay datapath for every other port.
Anchor lifecycle: born at node start (tap module probed with one
create/delete cycle, sweep of stale devices, ownership handed to the server
user, born down); a kernel link opens the anchor in the hypervisor, binds
the slot/port and enslaves it; removing the link releases the fd again
(nio delete) and detaches. A link bound while the router is stopped is
wired by the next start (deferred wiring). Node close follows QEMU's stop
order — the hypervisor's TAP NIOs go before tap delete, since it is
Dynamips, not uBridge, that holds the fds.
Stop is not close: vm stop only halts the emulated router, so the
hypervisor, the TAP fds, the bindings and the per-link bridges all survive
a stop/start untouched (attach skips ports that still hold their TAP NIO).
Port selection follows the adapter registry: ETHERNET_ADAPTERS and
ETHERNET_WICS name the models whose ports carry Ethernet frames (WIC-1ENET
included, at its Dynamips port number); serial, ATM and POS ports never
anchor, and a kernel link there errors with the relay-datapath message
instead of half-wiring. Adapters hot-added to a running router (OIR) get
their anchors at once.
The compute NIO routes accept nio_bridge alongside nio_udp (the same
widening QEMU needed), carry the endpoint's suspend flag on update (it is
the anchor's admin state on a kernel link), skip the hypervisor delete for
a kernel NIO (its TAP NIO was already released by the slot removal), and
the close path leaves NIOBridge instances to _stop_ubridge.
The IOU NIO update route never copied the body's suspend flag onto the
NIO; the Docker and QEMU routes always did. Harmless on the relay, where
suspend is emulated by the synthetic frequency_drop filter the controller
injects, but fatal on a kernel link, whose suspend *is* the anchor's
admin state: a suspended link kept forwarding traffic, and the resume
looked like it worked because nothing had ever stopped.
Eligibility gains an IOU branch gated on the compute's ubridge_iol_tap
(strict True: an unreported capability keeps the link on the relay), and
a port-level rule: a kernel link is an Ethernet segment, so any endpoint
whose port is not Ethernet (IOU serial) disqualifies the link before it
is dispatched. Without that, a serial link between two capable IOU nodes
would be sent as nio_bridge and fail at the compute.
The IOU NIO routes accept nio_bridge alongside the UDP/TAP/Ethernet NIOs
— without the widening the controller's POST is 422'd before the node
ever sees it, the same trap the QEMU routes hit.
Whether an IOU port can terminate on a persistent TAP (iol_bridge
add_nio_tap) is a capability of its own: the tap module and that command
land independently, so a build may have one without the other. Probed on
a scratch IOL bridge with a scratch TAP — one add/delete cycle, no
iol_bridge start needed (attaching a NIO works on a stopped bridge) —
cached by binary identity, with the scratch bridge id above the per-node
id space the fabric locks (513..1024) so a probe cannot collide with a
running node. Any failure, including an old build's "Unknown command",
means unknown: IOU stays on the relay datapath.
Reported through /capabilities as ubridge_iol_tap, next to ubridge_tap.
Kernel eligibility becomes "both endpoints on one compute, each able to
anchor": Docker always (adapters are born as veth pairs), QEMU when that
compute's uBridge can create the persistent TAPs its adapters anchor on. The
question is asked per compute, because the link needs both ends anchored --
so a mixed or half-upgraded deployment degrades to the relay instead of
failing an attach.
probe_tap_support() creates and deletes one throwaway persistent TAP through a
scratch uBridge, cached by binary identity like the tc report; /capabilities
exposes `ubridge_tap` (absent = unknown, which keeps links on the relay).
The compute route for a QEMU adapter NIO took UDPNIO only, so a kernel link
was rejected with 422: its body and response now accept
Union[UDPNIO, BridgeNIO] exactly like Docker's.
Stale "Docker-to-Docker" wording in the config, link and MCP descriptions now
talks about anchors, and docs/features/qemu-kernel-datapath.md documents the
datapath -- verified end-to-end on a real instance: 32/32 kernel-datapath
checks and 29/29 on the relay variant.
Consume uBridge's ebpf_modes contract (feature/tc-window 40c36ae): a
stateful mode is usable iff ebpf=1 and its token is listed; builds
predating the field keep their shipped modes (nth/quota/flow), so the
pre-correction window semantics can never be installed silently.
- gns3server/utils/tc_capabilities.py: shared reply parser, mode
policy and filter-type mappings (compute and controller gate on the
same rules)
- gns3server/compute/ubridge/tc_probe.py: standalone probe spawning a
throwaway uBridge as the server's own user, cached by binary
identity (path/mtime/size - the version string cannot distinguish
rebuilds); failures cache as unknown
- GET /v3/compute/capabilities gains ubridge_tc {netem, ebpf,
ebpf_modes, cbpf}; the controller forwards it (Compute.capabilities)
and available_filters hides kernel-datapath filter types an endpoint
compute cannot run (both ends apply their own filters, so one
incapable compute hides the type); computes without a report keep
the full list and apply-time 409 stays the guard
- docker: _ubridge_apply_ebpf_drops gates per mode token; the cleanup
path only sends "off" for modes the build declares
- split DockerVM's kernel-datapath machinery (veth lifecycle, carrier,
marker primitives, tc filter translation, kernel NIO teardown) into
compute/docker/docker_kernel_datapath.py (DockerKernelDatapathMixin)
Eligible links (both endpoints Docker, same compute, no filters/markers,
stopped nodes, no unix-socket NIO containers) are wired as veth pairs
enslaved into a per-link Linux kernel bridge (gns3 + 11 hex of the link
id, filling IFNAMSIZ) instead of the uBridge UDP relay, so frames flow
entirely in the kernel.
- NIOBridge NIO type: the controller decides the datapath in
UDPLink._prepare and both computes enslave their deterministic gv*/gc*
veth pair via uBridge's docker/brctl modules
- carrier/suspend = host-end admin state; both endpoints race-safely
create/delete the bridge (EEXIST/EBUSY/ENOENT tolerated)
- veth adapters can still attach relay (UDP) links on a running node:
lazy relay bridge over AF_PACKET on the host end (add_nio_ethernet)
- filters/markers/capture are rejected with explicit errors on this
datapath (they live in the uBridge relay); vendor unix-socket
containers are excluded; Server.enable_kernel_datapath is the
kill-switch (default on)
- host-end veths survive container death and are removed on stop plus
swept by name on the next start (crash/stale recovery)
