A VPCS node's single adapter anchors on a persistent TAP the server
creates (tap create + set_owner via uBridge) and the vpcs process
attaches to by name: -e -d <gp{id8}e0p0> -n, the same
server-creates/guest-attaches shape as QEMU's netdev. -n (a vpcs fork
feature) keeps the guest's ip command from ifconfig'ing the anchor on
the host; the vpcs build is probed once per binary identity
(vpcs_tap capability, usage scan) and gates kernel links together
with ubridge_tap — anything else keeps the node on the relay (the
legacy local UDP tunnel on a stock binary, an AF_PACKET endpoint on
the anchor with a capable one).
VPCSVM takes KernelDatapathMixin: _connect_nio dispatches kernel
(enslave into the per-link bridge) / relay-on-anchor / legacy,
captures pick capture start_kernel vs the bridge engine, stop runs
under an execute lock and terminates the process before deleting the
anchor TAPs (a held device refuses deletion), and the duplicate-port
guard backstops the controller's. The NIO routes accept nio_bridge
and write suspend back on update.
_delete_anchor_taps verifies each tap is gone from sysfs and retries
a bounded three times: a holder can release its fd a moment after its
process was reaped (vpcs's daemon parent kills its console child and
exits first), so the unconditional delete raced EBUSY and leaked the
anchor intermittently.
The vpcs side needs IFNAMSIZ (16) instead of its own IFNAMESIZ (12)
for the -d name buffer — anchor names are 14 chars and truncated to a
nonexistent device, which TUNSETIFF then tries to create without
CAP_NET_ADMIN (fixed in the vpcs fork).
e2e (tests/e2e/test_vpcs_kernel_datapath.py): kernel and relay
scenarios green against the real binary — real ICMP both ways, §E.1/§
E.2 on the anchors, delay/suspend/capture, link delete/re-create,
node stop/restart self-heal, zero leftovers; the relay control passes
with both the fork binary and a stock one.
Deleting a marker while its node was stopped, then starting the node, recreated
an empty pcap. Root cause: delete_marker_capture removed the uBridge filter and
the pcap file but not the marker spec cached on the port NIO (nio.markers) —
the data source _ubridge_apply_markers reads on node start. The stale spec
reinstalled the marker when uBridge came up.
This was a regression from switching stop_marker off update() (which re-sent
the NIO and implicitly refreshed nio.markers) to the fine-grained
node.delete(/markers/{name}) path.
Fix: make the delete port-aware so the compute can locate the NIO. The DELETE
marker route becomes /adapters/{a}/ports/{p}/markers/{name} across all six
node types; the handler resolves the NIO via get_nio and passes it to
delete_marker_capture, which now pops the marker from nio.markers. get_nio
works regardless of uBridge state, so the stopped-node case is covered. The
controller's stop_marker targets the capture side's adapter/port.
Deleting or updating a marker no longer triggers a full NIO reapply
(reset_packet_filters + re-add), which closed/reopened every sibling
marker's pcap via uBridge. Instead operate on single filters:
- stop_marker: bridge delete_packet_filter + unlink the pcap (works with
the node stopped; filter removal is skipped, the file is still deleted).
- update_marker: bpf/tag/direction → rebuild just that filter (delete + add);
enabled → instant toggle; color/highlight_duration → stored only.
- compute delete_marker_capture / rebuild_marker_filter + per-node routes
(DELETE /markers/{name}, PUT /markers/{name}/rebuild) + MarkerRebuild schema.
IOU overrides _ubridge_delete_marker_filter for iol_bridge; rebuild reuses
the already-overridden add/delete/set, so IOU needs no rebuild override.
The _marker_filter_bridges dict was keyed by marker name alone, so when one
node hosted the same filter name on several links (IUOL-BRIDGE per node with
many bays/units, or a multi-interface router), successive apply calls
overwrote earlier entries. pause_marker_definition then toggled only the last
recorded bridge/location — other copies stayed active and kept emitting.
Key by (name, link_id) so each copy is independent, and iterate all matching
entries in _ubridge_set_marker_filter_state (both generic bridge and IOU
iol_bridge override). Toggle route existence checks also iterate matching
names. Tests updated.
Toggle routes silently no-opped when _marker_filter_bridges lacked the filter
name, so update_marker's enabled-only short-circuit succeeded without toggling
uBridge — the controller-layer enabled was set but the uBridge filter stayed on
and kept emitting signals. Now the toggle routes raise HTTPException 404
(FastAPI handles it directly, no ERROR log); the controller's except catches it
and falls back to self.update() (NIO rebuild, which applies the marker + off).
Wire gns3-server to uBridge's real-time marker controls (contract
../ubridge/doc/gns3server-integration.md §3.2), in three layers:
A. enabled reaches uBridge — _markers_for_node no longer drops disabled
markers controller-side; it carries `enabled` in the NIO spec. apply
installs every marker then issues `enable_packet_filter … off` for the
disabled ones (base_node bridge / iou iol_bridge; old-ubridge errors
downgrade to a warning so a toggle can't break link create).
B. instant per-filter toggle — apply records name→bridge so a new
`_ubridge_set_marker_filter_state` can flip a running filter with
`enable_packet_filter on|off` (iou overrides for iol_bridge + bay/unit).
Each marker-capable node type gains PUT /markers/{name}; update_marker
short-circuits to it when only `enabled` changes (no NIO rebuild, no pcap
flush), falling back to reset+reapply if the route is unavailable.
C. global pause/resume — `_ubridge_marker_pause/resume` send `marker pause`
/ `marker resume` direct to the hypervisor (pause stops signal+pcap,
resume instant, sink retained). Six node-type routes add POST
/markers/pause|resume; project.pause_all/resume_all_markers fan out to
each capture node (deduped, best-effort); REST exposes
POST /projects/{id}/markers/pause|resume.
Toggling enabled and pause/resume are now both instant — only marker create
or a bpf change still go through reset+reapply.
Markers now follow exactly the same apply pattern as packet filters:
state lives in Link._markers, application goes through NIO
(update() -> PUT /nio -> _ubridge_apply_markers). The former
immediate-apply REST endpoints (/markers/start, /markers/stop on
the compute side) and the per-node start_marker/stop_marker methods
are removed — they were a legacy of the original capture-inspired
design and have been superseded by the NIO flow.
Changes:
- controller/udp_link: start_marker/stop_marker/update_marker now
set _markers state + call self.update() (mirrors update_filters).
Removed _marker_capture_nodes runtime dict and its helpers.
- controller/project: _create_link_from_topology_data restores
_markers directly from persisted data (with BPF validation,
like filter reload). No long calls start_marker during load.
- compute: _ubridge_apply_markers swallows BPF compile errors
(warn+skip), matching _ubridge_apply_filters behaviour so a
single bad expression cannot break link creation / node restart.
- Removed: /markers/start,stop endpoints (6 handlers across
vpcs/qemu/docker route files), node start_marker/stop_marker
methods (3 VM files), _ubridge_delete_marker_filter,
_marker_capture_nodes, MarkerDelete schema.
Net: ~280 lines of dead code removed; marker and packet filter now
share a single, unified apply path via the NIO.
Mirror the packet-filter lifecycle: marker specs now live on the NIO
(next to filters), ride in link_data from controller to compute on
every NIO create/update, and are reapplied by _ubridge_apply_markers
in add_ubridge_udp_connection (bridge creation / node restart) and
update_ubridge_udp_connection (NIO update — following the preceding
reset_packet_filters so markers survive filter changes).
Changes:
- NIO / NIOUDP: _markers property + asdict
- schemas/compute/nios.py: UDPNIO.markers field
- base_manager.create_nio: nio.markers from settings
- PUT /nio routes (vpcs/qemu/docker): nio.markers update
- base_node: _ubridge_apply_markers(bridge_name, nio) iterates
nio.markers, computes pcap path, calls _ubridge_add_marker_filter
+ MarkerManager.register; called after _ubridge_apply_filters
- controller udp_link: _get_node_markers + _markers_for_node (route
by capture_node_id); markers in create() and update() link_data
- /markers/start,stop endpoints: mirror spec onto nio.markers so
the marker survives a subsequent node stop/start without a PUT
- tests: add markers field to NIO data expectations
This covers:
- Node restart: NIO persists, add_ubridge_udp_connection re-applies
- Filter update: reset wipes markers, _ubridge_apply_markers re-adds
- Project reload: create() carries markers in link_data → create_nio
- Immediate create: endpoint sets nio.markers immediately
