Resolve conflicts against the upstream wave (PRs #2952-#2965, incl. the
typed-response/schema hardening and the drop of Python 3.10):
- controller/node.py: keep upstream's _transitioning/_confirm_status
lifecycle guard; the kernel-anchor link wiring (node_started) runs
after the transition completes.
- controller/link.py: keep upstream's add_node rollback (release_ports
on create failure) and delete via release_ports; release_ports now
resolves ports live (same staleness reason as _bind_members) and
discards the node link unconditionally.
- schemas/controller/links.py: extend LinkFilterType with the eight
kernel-datapath filter types and LinkFilterParameter.type with "str"
so the newly typed /available_filters response validates; Link.filters
stays a free-form dict — the vocabulary is capability-gated per link
and validated by the controller (409), not by a strict request schema.
- schemas/controller/topology.py: drop the type: ignore made redundant
by the dict filters field.
- tests: route-level filter validation now expects the controller's 409
(unknown types, out-of-range values); packet_loss correlation is a
valid kernel parameter (positive test added); OpenAPI assertions match
the free-form filters property.
Compute:
- Track the anchor that owns uBridge's single AF_PACKET capture slot: a
second kernel port's capture is refused with a clear error (its flag
rolled back), a failed start no longer wedges the port, and only the
owning port's stop issues the process-wide `capture stop_kernel`
(docker/qemu/iou/dynamips/switch, via the mixin's slot helpers).
- Unwind failed starts instead of leaking uBridge and the anchor TAPs:
QEMU's stop body runs under try/finally, QEMU and IOU start the datapath
inside the launch try, Dynamips undoes a half-attached port (the retry
used to be short-circuited into a silent black hole), and Docker deletes
the veth pair when the namespace move fails.
- Restore the relay filter guard on IOU (kernel-only filters raise
NodeError, an uncompilable BPF line degrades to a warning), validate the
eBPF/quota/window/bpf filter shapes before touching the bridge (short or
non-numeric values surfaced as 500s after partial state), and refuse a
second NIO on an occupied Docker/QEMU port (the guard IOU and Dynamips
already had).
- Probe fixes: `_probe_bridge_tap` survives a failing uBridge start, and
the probe caches key on ctime too, so a chmod/setcap remedy re-probes.
Controller:
- Parse GNS3_UNIX_SOCKET_NIO like the compute does (line-anchored, truthy
value) and mirror the compute's class selection in kernel_anchor_type.
- Read partial capability reports defensively; make BridgeNIO.bridge
required-but-nullable so an omitted key is a 422 rather than a KeyError.
- Strip the packet_loss correlation slot even when it is zero: the relay
filter takes exactly one argument and rejected `packet_loss 10 0`.
Ethernet switch: skip ports whose absorbed anchor does not exist yet (the
join is deferred by design) and roll the ports_mapping back when the VLAN
reconcile fails, so a retry still diffs against the old mapping.
Agent: reject device config entries without a device_name instead of
silently dropping them (a malformed batch used to execute partially while
reporting success).
Also split the netem builder to clear C901 and drop the two per-file ruff
ignores the PR had added, keeping the remove-only policy.
The rebase onto upstream 3.1 (mypy + ruff I001/F401 waves) left the tree
short of the newly enforced baselines in three ways:
* contextlib / UbridgeError imports dropped as false duplicates during
conflict resolution left NameErrors in iou_vm and qemu_vm (F821);
the Dynamips router grabbed the compute-level NIOTAP instead of the
hypervisor one, breaking TAP anchoring (test failure).
* unused imports (KERNEL_UNSUPPORTED_FILTERS, UbridgeError, List) and
unsorted blocks left behind where the stack's later commits moved the
last usage elsewhere — ruff I001/F401/RUF022 now enforce these.
* mypy, now baseline-free: cache dict annotations in tc_probe, the
locators candidate list, the resolved-params None branch in the MCP
runner, and validate_bpf_syntax keeps the upstream Dict[str, Any]
return (the strict Optional[str] was wrong for the "valid" bool entry).
The e2e raw-frame probe resolves its compiler via shutil.which (S607)
and zips with strict= (B905); the remaining subprocess call is S603 by
nature and gets a per-file ignore like other test files.
ruff check/format clean, mypy at upstream parity (no new errors),
full unit suite 2167 passed.
The bridge module gained delete_nio_tap (uBridge's gns3server-integration
contract, section 'bridge — generic NIO relay with a swappable TAP leg'):
a per-port bridge can swap its topology leg between UDP and a persistent
TAP through stop -> delete -> add -> start, which is what lets an IOL
runner container's port bridge carry a kernel-link anchor.
The probe needs no scratch objects and no capabilities: one command
against a bridge that cannot exist — 202 (unknown command) is an old
build, 214 (bridge doesn't exist) is a new one. Cached by binary identity
like every other probe; any failure reports unknown.
GET /v3/compute/capabilities gains ubridge_bridge_tap; the controller's
default capability dict carries it too (the single schema definition, per
the 1e67fbf12 lesson).
Switch-to-switch links were the last shape left on the relay: the switch
fast path works by absorbing the *peer's* anchor, and a switch has none —
its ports are its own bridge, and a kernel interface belongs to exactly
one bridge, so two bridges cannot be joined by enslaving anything.
Join them with a veth pair instead: one end per bridge, each side
enslaving its own end and applying its own port mode to it — an access
port on one side and a trunk on the other behaves like the real cable it
models. uBridge's docker create_veth/delete_veth (the primitive every
Docker adapter is already born from) creates and destroys the pair; the
names derive from the link id (utils.kernel_anchor.kernel_cascade_names),
so each side computes its own end and the names survive a restart.
The pair belongs to the link, and the two ends are wired by two
independent uBridge processes — the project-open batch drives different
nodes concurrently — so the protocol is order-free: both sides create the
pair when their own end is missing (one create wins; the loser's failure
is re-checked against the kernel and "the pair is there" is not an
error), and either side's teardown destroys it (deleting one veth end
takes the other with it, so both converge on the same gone pair and the
second delif answers ENOENT). A pre-existing end — this switch restarted,
or a leftover from a previous life of the link id — is reused rather than
recreated, because the other end may still be a live port of the peer
switch; a stale tc qdisc is all a reused end can carry.
No new wire format was needed: a cascade is an anchor NIO on both ends,
the absorbed-anchor case plus the peer end's name. That also corrects the
filter routing — the single-sided rule exists because an absorbed anchor
is one interface, while a cascade has one per switch, so impairments go
to both ends like any other kernel link.
Tests: the wire format, the eligibility flip and the both-ends re-push on
node start (controller); the naming contract (utils); the switch-side
lifecycle — create, reuse, lost create race, delete destroys the pair
(compute routes).
Drive-by: the relay filter test's compute mock carried no awaitable
`put`, so tests/controller/test_kernel_datapath_link.py failed when run
alone while an argument-less full run passed; callers now get one.
The Ethernet switch's kernel fast path: instead of a link crossing the
switch's per-port uBridge relay, the switch absorbs the peer's anchor into
its own kernel bridge. The peer's interface (Docker veth host end, QEMU
TAP, IOU port TAP, Dynamips port TAP) becomes the switch port, and frames
cross anchor -> switch bridge -> switch ports entirely in the kernel.
Wire format: the switch end receives nio_anchor ('join this interface to
my own bridge' — the mirror of nio_bridge), the peer end nio_bridge with a
null bridge ('your anchor is bridged elsewhere': carrier, markers and
impairments only — never bridge membership, and never a bridge delete, on
an interface this node does not own). Anchor names come from the shared
naming contract (utils.kernel_anchor), a pure function of node type, id,
adapter and port — the controller computes the peer's anchor while the
node may be stopped, which is what makes links to stopped nodes wireable.
Stopped peers defer the join; after any node of a link starts
(UDPLink.node_started) the controller re-pushes the switch NIO, and the
switch completes — or repairs, when a peer restart replaced its interface
under the same name — the join against the kernel's actual membership
instead of assuming it.
VLAN changes now edit membership in place: only the ports whose mode/VLAN
actually changed are touched, each losing exactly the previous mode's
entries the new mode does not want (the dot1q admits-all entry is one
range operation in both directions), and no port ever leaves the bridge to
change its VLANs. This replaces the old 'reset by re-enslaving' shortcut
(delif+addif on every wired port, added when the ports were the switch's
own TAPs): on absorbed anchors, re-enslaving an interface owned by another
node is where live testing watched links die — anchors occasionally lost
their bridge membership right after a ports_mapping update (later updates
then failed with delif EINVAL), reproducibly with qemu, IOU and Dynamips
peers and never with Docker's veths.
Eligibility: the switch side needs no capability of its own (its bridge
exists by construction); the peer must be able to anchor. Switch-to-switch
cascades stay on the relay — a kernel interface belongs to one bridge, and
joining two bridges needs a veth pair, deferred.
Verified live on a real server: qemu peers through four VLAN cycles with
both anchors enslaved throughout; a mixed switch (2 IOU + 2 Dynamips, four
kernel ports); Docker peers with real ICMP isolating and recovering (with
both anchors still enslaved); VPCS relay ports likewise in place.
GET /computes/{id} answered with only part of the capabilities the compute
reports: the response schema kept a second, private Capabilities class of
its own (it knew ubridge_tc and nothing else), and FastAPI's response model
silently drops fields it does not define — so ubridge_tap and
ubridge_iol_tap never reached clients even though the compute had sent
them and links were already being built on those datapaths.
Import the one definition instead of duplicating it, so the next capability
cannot drift the same way.
Whether an IOU port can terminate on a persistent TAP (iol_bridge
add_nio_tap) is a capability of its own: the tap module and that command
land independently, so a build may have one without the other. Probed on
a scratch IOL bridge with a scratch TAP — one add/delete cycle, no
iol_bridge start needed (attaching a NIO works on a stopped bridge) —
cached by binary identity, with the scratch bridge id above the per-node
id space the fabric locks (513..1024) so a probe cannot collide with a
running node. Any failure, including an old build's "Unknown command",
means unknown: IOU stays on the relay datapath.
Reported through /capabilities as ubridge_iol_tap, next to ubridge_tap.
Kernel eligibility becomes "both endpoints on one compute, each able to
anchor": Docker always (adapters are born as veth pairs), QEMU when that
compute's uBridge can create the persistent TAPs its adapters anchor on. The
question is asked per compute, because the link needs both ends anchored --
so a mixed or half-upgraded deployment degrades to the relay instead of
failing an attach.
probe_tap_support() creates and deletes one throwaway persistent TAP through a
scratch uBridge, cached by binary identity like the tc report; /capabilities
exposes `ubridge_tap` (absent = unknown, which keeps links on the relay).
The compute route for a QEMU adapter NIO took UDPNIO only, so a kernel link
was rejected with 422: its body and response now accept
Union[UDPNIO, BridgeNIO] exactly like Docker's.
Stale "Docker-to-Docker" wording in the config, link and MCP descriptions now
talks about anchors, and docs/features/qemu-kernel-datapath.md documents the
datapath -- verified end-to-end on a real instance: 32/32 kernel-datapath
checks and 29/29 on the relay variant.
grossmj
Guobin Yue
YueGuobin
Mark Paronyan