The persistent-TAP lifecycle — probe, sweep, create, register, delete —
was implemented four times, once per node type, and the copies had drifted
(probe mechanism, _tap_datapath reset, keep-vs-recreate policy). The
mechanical half moves into KernelDatapathMixin:
- _probe_persistent_taps(probe_name): the scratch-TAP probe, returning the
refusal for the caller's own warning (QEMU, Dynamips);
- _create_anchor_taps(ports, set_owner, keep_existing): sweep + create +
optional ownership handover + carrier down + registry, with the ports
enumerated by the node type and named through the new _tap_name hook;
- _delete_anchor_taps(): the suppressed tap sweep + per-link bridge
cleanup + registry clear.
Each node type keeps what its fd holder dictates: the release step before
the tap sweep (the QEMU process, the IOL bridge, the hypervisor's NIO
bindings, the container port bridges), its probe policy, and its registry
lifetime. QEMU's now-unconditional registry clear aligns it with the other
three; everything else is behavior-preserving.
Compute:
- Track the anchor that owns uBridge's single AF_PACKET capture slot: a
second kernel port's capture is refused with a clear error (its flag
rolled back), a failed start no longer wedges the port, and only the
owning port's stop issues the process-wide `capture stop_kernel`
(docker/qemu/iou/dynamips/switch, via the mixin's slot helpers).
- Unwind failed starts instead of leaking uBridge and the anchor TAPs:
QEMU's stop body runs under try/finally, QEMU and IOU start the datapath
inside the launch try, Dynamips undoes a half-attached port (the retry
used to be short-circuited into a silent black hole), and Docker deletes
the veth pair when the namespace move fails.
- Restore the relay filter guard on IOU (kernel-only filters raise
NodeError, an uncompilable BPF line degrades to a warning), validate the
eBPF/quota/window/bpf filter shapes before touching the bridge (short or
non-numeric values surfaced as 500s after partial state), and refuse a
second NIO on an occupied Docker/QEMU port (the guard IOU and Dynamips
already had).
- Probe fixes: `_probe_bridge_tap` survives a failing uBridge start, and
the probe caches key on ctime too, so a chmod/setcap remedy re-probes.
Controller:
- Parse GNS3_UNIX_SOCKET_NIO like the compute does (line-anchored, truthy
value) and mirror the compute's class selection in kernel_anchor_type.
- Read partial capability reports defensively; make BridgeNIO.bridge
required-but-nullable so an omitted key is a 422 rather than a KeyError.
- Strip the packet_loss correlation slot even when it is zero: the relay
filter takes exactly one argument and rejected `packet_loss 10 0`.
Ethernet switch: skip ports whose absorbed anchor does not exist yet (the
join is deferred by design) and roll the ports_mapping back when the VLAN
reconcile fails, so a retry still diffs against the old mapping.
Agent: reject device config entries without a device_name instead of
silently dropping them (a malformed batch used to execute partially while
reporting success).
Also split the netem builder to clear C901 and drop the two per-file ruff
ignores the PR had added, keeping the remove-only policy.
The rebase onto 65c858d45 brought upstream's UP032 enforcement; the
conflict resolution kept this branch's semantics on the overlapping
lines, so their .format() calls needed the conversion afterwards
(ruff check --fix, 41 sites) plus the formatter's rewrap (7 files).
Replicates the CI recipe locally: pip check, ruff check/format, mypy
2.3.1 (clean, 434 files), unit suite 2216 passed.
The rebase onto upstream 3.1 (mypy + ruff I001/F401 waves) left the tree
short of the newly enforced baselines in three ways:
* contextlib / UbridgeError imports dropped as false duplicates during
conflict resolution left NameErrors in iou_vm and qemu_vm (F821);
the Dynamips router grabbed the compute-level NIOTAP instead of the
hypervisor one, breaking TAP anchoring (test failure).
* unused imports (KERNEL_UNSUPPORTED_FILTERS, UbridgeError, List) and
unsorted blocks left behind where the stack's later commits moved the
last usage elsewhere — ruff I001/F401/RUF022 now enforce these.
* mypy, now baseline-free: cache dict annotations in tc_probe, the
locators candidate list, the resolved-params None branch in the MCP
runner, and validate_bpf_syntax keeps the upstream Dict[str, Any]
return (the strict Optional[str] was wrong for the "valid" bool entry).
The e2e raw-frame probe resolves its compiler via shutil.which (S607)
and zips with strict= (B905); the remaining subprocess call is S603 by
nature and gets a per-file ignore like other test files.
ruff check/format clean, mypy at upstream parity (no new errors),
full unit suite 2167 passed.
QEMU's process monitor calls stop() by itself when the process dies, so an
API stop and a process-death stop run concurrently in the normal case — and
the datapath release sat outside _execute_lock, letting both stops sweep the
adapter TAP map at the same time. Whichever finished first cleared
_kernel_taps under the other's iterator, which died with "dictionary changed
size during iteration" (the monitor's task, so it surfaced as "Task exception
was never retrieved") with the rest of its sweep, the orphan-bridge removal
and uBridge's shutdown skipped.
Keep the previous fix's ordering (process side first, then the devices) and
hold the lock across the release: serialized, the second stop finds uBridge
gone and sweeps nothing. Reproduced deterministically with two concurrent
stop() calls, the first parked mid-sweep — it raised at qemu_vm.py:1659
before the change, and every TAP is swept exactly once after it.
QEMU is the guest side of every adapter TAP, and uBridge's tap delete
refuses a device another process holds open ('Device or resource busy') —
a best-effort delete whose failure is suppressed. QEMU's stop did the
delete first and stopped the process after, so every node stop or project
delete leaked the persistent TAPs: found by inspecting the host after a
project delete (16 taps left behind, carrier down, no holder), and the
held-tap behaviour reproduced against uBridge directly.
Stop the QEMU process first, then remove the TAPs and the per-link kernel
bridges — process side first, then the devices, the same lesson as IOU's
reverse stop order. Verified live: node stop and project delete now leave
no taps and no processes behind, while a restart recreates the TAPs.
The adapter anchor naming also goes through the shared
utils.kernel_anchor helper, like the other node types.
_console_options() fell through the "none" branch and returned None, so
_build_command() blew up on `command.extend(None)`: a QEMU node with
console_type "none" -- offered by the GUI, and what API/MCP-driven labs use
to skip the console entirely -- failed to start with a 500 and a traceback.
Return an empty list, exactly like _aux_options() already does, and cover it
with a test that builds the command line for a headless node. Verified on a
live instance: such a node now starts (204) with `console: null` and no
-serial device in the QEMU command line.
QEMU had no host-side interface at all: every adapter was a local UDP tunnel
into uBridge (-netdev socket plus two UDP ports per adapter), so a link could
only ever be a userspace relay. Each adapter now owns a persistent TAP
(gq{node_id[:8]}e{adapter}p{port}), created by uBridge before QEMU is launched
and handed to this user, and the netdev is that TAP -- the anchor role Docker's
veth host end plays. Links attach to it:
* kernel link (NIOBridge): brctl create/up/addif enslaves the TAP into the
per-link bridge and capture, markers and tc filters are installed on it,
verbatim through the shared KernelDatapathMixin -- a TAP and a veth host end
are interchangeable there (an egress qdisc on either impairs traffic entering
the node, and PACKET_OUTGOING on either is the node receiving);
* relay link: bridge add_nio_ethernet plus add_nio_udp -- AF_PACKET, never the
TAP NIO, which would take the fd QEMU itself holds.
The netdev type is fixed at launch, so this is all-or-nothing per VM: on the
TAP datapath every link type attaches to (or detaches from) a running VM,
including switching a link between the two datapaths. Stop un-persists the
TAPs (QEMU's open fd keeps each device alive until it exits) and removes the
per-link bridges; start sweeps leftovers first. A uBridge without the tap
module keeps the previous socket-netdev datapath, so an unupgraded install is
unaffected -- such a node simply cannot carry kernel links.
When a hostname validation fails, the error message now includes
the allowed character set to help users provide valid names.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* Offset pci_device_id for network devices by 32 (formerly 4)
to reserve first 32 IDs for non-netdev devices
* This implies a new pci_bridge for the netdevs and
the pci_device_ids starting at 0 (using modulo)
* Fixes a bug in the creation of the qemu command
when the number of qemu pcie devices (storage_controller, disks, …)
was greater than 4 and the number of network devices
saturated the 32 pcie ids of the root bridge
causing qemu not to start.
