Compute:
- Track the anchor that owns uBridge's single AF_PACKET capture slot: a
second kernel port's capture is refused with a clear error (its flag
rolled back), a failed start no longer wedges the port, and only the
owning port's stop issues the process-wide `capture stop_kernel`
(docker/qemu/iou/dynamips/switch, via the mixin's slot helpers).
- Unwind failed starts instead of leaking uBridge and the anchor TAPs:
QEMU's stop body runs under try/finally, QEMU and IOU start the datapath
inside the launch try, Dynamips undoes a half-attached port (the retry
used to be short-circuited into a silent black hole), and Docker deletes
the veth pair when the namespace move fails.
- Restore the relay filter guard on IOU (kernel-only filters raise
NodeError, an uncompilable BPF line degrades to a warning), validate the
eBPF/quota/window/bpf filter shapes before touching the bridge (short or
non-numeric values surfaced as 500s after partial state), and refuse a
second NIO on an occupied Docker/QEMU port (the guard IOU and Dynamips
already had).
- Probe fixes: `_probe_bridge_tap` survives a failing uBridge start, and
the probe caches key on ctime too, so a chmod/setcap remedy re-probes.
Controller:
- Parse GNS3_UNIX_SOCKET_NIO like the compute does (line-anchored, truthy
value) and mirror the compute's class selection in kernel_anchor_type.
- Read partial capability reports defensively; make BridgeNIO.bridge
required-but-nullable so an omitted key is a 422 rather than a KeyError.
- Strip the packet_loss correlation slot even when it is zero: the relay
filter takes exactly one argument and rejected `packet_loss 10 0`.
Ethernet switch: skip ports whose absorbed anchor does not exist yet (the
join is deferred by design) and roll the ports_mapping back when the VLAN
reconcile fails, so a retry still diffs against the old mapping.
Agent: reject device config entries without a device_name instead of
silently dropping them (a malformed batch used to execute partially while
reporting success).
Also split the netem builder to clear C901 and drop the two per-file ruff
ignores the PR had added, keeping the remove-only policy.
The rebase onto upstream 3.1 (mypy + ruff I001/F401 waves) left the tree
short of the newly enforced baselines in three ways:
* contextlib / UbridgeError imports dropped as false duplicates during
conflict resolution left NameErrors in iou_vm and qemu_vm (F821);
the Dynamips router grabbed the compute-level NIOTAP instead of the
hypervisor one, breaking TAP anchoring (test failure).
* unused imports (KERNEL_UNSUPPORTED_FILTERS, UbridgeError, List) and
unsorted blocks left behind where the stack's later commits moved the
last usage elsewhere — ruff I001/F401/RUF022 now enforce these.
* mypy, now baseline-free: cache dict annotations in tc_probe, the
locators candidate list, the resolved-params None branch in the MCP
runner, and validate_bpf_syntax keeps the upstream Dict[str, Any]
return (the strict Optional[str] was wrong for the "valid" bool entry).
The e2e raw-frame probe resolves its compiler via shutil.which (S607)
and zips with strict= (B905); the remaining subprocess call is S603 by
nature and gets a per-file ignore like other test files.
ruff check/format clean, mypy at upstream parity (no new errors),
full unit suite 2167 passed.
The bridge module gained delete_nio_tap (uBridge's gns3server-integration
contract, section 'bridge — generic NIO relay with a swappable TAP leg'):
a per-port bridge can swap its topology leg between UDP and a persistent
TAP through stop -> delete -> add -> start, which is what lets an IOL
runner container's port bridge carry a kernel-link anchor.
The probe needs no scratch objects and no capabilities: one command
against a bridge that cannot exist — 202 (unknown command) is an old
build, 214 (bridge doesn't exist) is a new one. Cached by binary identity
like every other probe; any failure reports unknown.
GET /v3/compute/capabilities gains ubridge_bridge_tap; the controller's
default capability dict carries it too (the single schema definition, per
the 1e67fbf12 lesson).
Switch-to-switch links were the last shape left on the relay: the switch
fast path works by absorbing the *peer's* anchor, and a switch has none —
its ports are its own bridge, and a kernel interface belongs to exactly
one bridge, so two bridges cannot be joined by enslaving anything.
Join them with a veth pair instead: one end per bridge, each side
enslaving its own end and applying its own port mode to it — an access
port on one side and a trunk on the other behaves like the real cable it
models. uBridge's docker create_veth/delete_veth (the primitive every
Docker adapter is already born from) creates and destroys the pair; the
names derive from the link id (utils.kernel_anchor.kernel_cascade_names),
so each side computes its own end and the names survive a restart.
The pair belongs to the link, and the two ends are wired by two
independent uBridge processes — the project-open batch drives different
nodes concurrently — so the protocol is order-free: both sides create the
pair when their own end is missing (one create wins; the loser's failure
is re-checked against the kernel and "the pair is there" is not an
error), and either side's teardown destroys it (deleting one veth end
takes the other with it, so both converge on the same gone pair and the
second delif answers ENOENT). A pre-existing end — this switch restarted,
or a leftover from a previous life of the link id — is reused rather than
recreated, because the other end may still be a live port of the peer
switch; a stale tc qdisc is all a reused end can carry.
No new wire format was needed: a cascade is an anchor NIO on both ends,
the absorbed-anchor case plus the peer end's name. That also corrects the
filter routing — the single-sided rule exists because an absorbed anchor
is one interface, while a cascade has one per switch, so impairments go
to both ends like any other kernel link.
Tests: the wire format, the eligibility flip and the both-ends re-push on
node start (controller); the naming contract (utils); the switch-side
lifecycle — create, reuse, lost create race, delete destroys the pair
(compute routes).
Drive-by: the relay filter test's compute mock carried no awaitable
`put`, so tests/controller/test_kernel_datapath_link.py failed when run
alone while an argument-less full run passed; callers now get one.
The Ethernet switch's kernel fast path: instead of a link crossing the
switch's per-port uBridge relay, the switch absorbs the peer's anchor into
its own kernel bridge. The peer's interface (Docker veth host end, QEMU
TAP, IOU port TAP, Dynamips port TAP) becomes the switch port, and frames
cross anchor -> switch bridge -> switch ports entirely in the kernel.
Wire format: the switch end receives nio_anchor ('join this interface to
my own bridge' — the mirror of nio_bridge), the peer end nio_bridge with a
null bridge ('your anchor is bridged elsewhere': carrier, markers and
impairments only — never bridge membership, and never a bridge delete, on
an interface this node does not own). Anchor names come from the shared
naming contract (utils.kernel_anchor), a pure function of node type, id,
adapter and port — the controller computes the peer's anchor while the
node may be stopped, which is what makes links to stopped nodes wireable.
Stopped peers defer the join; after any node of a link starts
(UDPLink.node_started) the controller re-pushes the switch NIO, and the
switch completes — or repairs, when a peer restart replaced its interface
under the same name — the join against the kernel's actual membership
instead of assuming it.
VLAN changes now edit membership in place: only the ports whose mode/VLAN
actually changed are touched, each losing exactly the previous mode's
entries the new mode does not want (the dot1q admits-all entry is one
range operation in both directions), and no port ever leaves the bridge to
change its VLANs. This replaces the old 'reset by re-enslaving' shortcut
(delif+addif on every wired port, added when the ports were the switch's
own TAPs): on absorbed anchors, re-enslaving an interface owned by another
node is where live testing watched links die — anchors occasionally lost
their bridge membership right after a ports_mapping update (later updates
then failed with delif EINVAL), reproducibly with qemu, IOU and Dynamips
peers and never with Docker's veths.
Eligibility: the switch side needs no capability of its own (its bridge
exists by construction); the peer must be able to anchor. Switch-to-switch
cascades stay on the relay — a kernel interface belongs to one bridge, and
joining two bridges needs a veth pair, deferred.
Verified live on a real server: qemu peers through four VLAN cycles with
both anchors enslaved throughout; a mixed switch (2 IOU + 2 Dynamips, four
kernel ports); Docker peers with real ICMP isolating and recovering (with
both anchors still enslaved); VPCS relay ports likewise in place.
GET /computes/{id} answered with only part of the capabilities the compute
reports: the response schema kept a second, private Capabilities class of
its own (it knew ubridge_tc and nothing else), and FastAPI's response model
silently drops fields it does not define — so ubridge_tap and
ubridge_iol_tap never reached clients even though the compute had sent
them and links were already being built on those datapaths.
Import the one definition instead of duplicating it, so the next capability
cannot drift the same way.
Whether an IOU port can terminate on a persistent TAP (iol_bridge
add_nio_tap) is a capability of its own: the tap module and that command
land independently, so a build may have one without the other. Probed on
a scratch IOL bridge with a scratch TAP — one add/delete cycle, no
iol_bridge start needed (attaching a NIO works on a stopped bridge) —
cached by binary identity, with the scratch bridge id above the per-node
id space the fabric locks (513..1024) so a probe cannot collide with a
running node. Any failure, including an old build's "Unknown command",
means unknown: IOU stays on the relay datapath.
Reported through /capabilities as ubridge_iol_tap, next to ubridge_tap.
Kernel eligibility becomes "both endpoints on one compute, each able to
anchor": Docker always (adapters are born as veth pairs), QEMU when that
compute's uBridge can create the persistent TAPs its adapters anchor on. The
question is asked per compute, because the link needs both ends anchored --
so a mixed or half-upgraded deployment degrades to the relay instead of
failing an attach.
probe_tap_support() creates and deletes one throwaway persistent TAP through a
scratch uBridge, cached by binary identity like the tc report; /capabilities
exposes `ubridge_tap` (absent = unknown, which keeps links on the relay).
The compute route for a QEMU adapter NIO took UDPNIO only, so a kernel link
was rejected with 422: its body and response now accept
Union[UDPNIO, BridgeNIO] exactly like Docker's.
Stale "Docker-to-Docker" wording in the config, link and MCP descriptions now
talks about anchors, and docs/features/qemu-kernel-datapath.md documents the
datapath -- verified end-to-end on a real instance: 32/32 kernel-datapath
checks and 29/29 on the relay variant.
Three fixes from live-calibrating the kernel impairment filters on an
isolated instance (Docker-to-Docker veth link, per-sequence evidence):
- update_filters skipped an unchanged filters dict as a no-op, so a
one-shot window_drop outage that had already passed could never be
re-armed: re-applying the same values produced no datapath command at
all. A PUT still carrying window_drop now reconciles, restarting the
schedule from the apply as documented. Measured: identical re-apply
moves the outage window from seq 50-70 to 70-91 (arm at +8s of the
new apply).
- gemodel parameter semantics were documented backwards in the
validation rules, available_filters, the MCP/copilot descriptions and
the feature docs. Measured against the kernel (per-direction counters,
offered = sent + dropped): p is the good-to-bad transition chance, r
the bad-to-good transition, 1-h the loss chance in the bad state (the
good state loses nothing) - mean one-way loss p/(p+r)*(1-h), e.g.
[10,30,100] -> 24.8%/25.7% measured vs 25% predicted, [5,45,100] ->
10.8% both ways vs 10%.
- kernel_datapath was silently stripped from every REST/MCP link payload
by the response model (LinkBase carried no such field), so clients
could not tell a kernel link from a relay one.
Also verified on the same setup: the 3-argument window_drop form works
exactly as specified ([3000,5000,100] -> a single seq 31-55 outage,
[20000,6000,100] -> seq 115-144), and both generations of the command
builder emit the parameters unpadded.
Adds an API test for the field and controller tests for the no-op skip
and the window_drop re-arm exemption.
Consume uBridge's ebpf_modes contract (feature/tc-window 40c36ae): a
stateful mode is usable iff ebpf=1 and its token is listed; builds
predating the field keep their shipped modes (nth/quota/flow), so the
pre-correction window semantics can never be installed silently.
- gns3server/utils/tc_capabilities.py: shared reply parser, mode
policy and filter-type mappings (compute and controller gate on the
same rules)
- gns3server/compute/ubridge/tc_probe.py: standalone probe spawning a
throwaway uBridge as the server's own user, cached by binary
identity (path/mtime/size - the version string cannot distinguish
rebuilds); failures cache as unknown
- GET /v3/compute/capabilities gains ubridge_tc {netem, ebpf,
ebpf_modes, cbpf}; the controller forwards it (Compute.capabilities)
and available_filters hides kernel-datapath filter types an endpoint
compute cannot run (both ends apply their own filters, so one
incapable compute hides the type); computes without a report keep
the full list and apply-time 409 stays the guard
- docker: _ubridge_apply_ebpf_drops gates per mode token; the cleanup
path only sends "off" for modes the build declares
- split DockerVM's kernel-datapath machinery (veth lifecycle, carrier,
marker primitives, tc filter translation, kernel NIO teardown) into
compute/docker/docker_kernel_datapath.py (DockerKernelDatapathMixin)
Consume the eBPF impairment classifier delivered in uBridge
feature/tc-precision: frequency_drop becomes the exact every-Nth mode
(tc nth_drop; -1 = drop everything maps to every 1st) and the new
kernel-only quota type is the byte-cap mode (tc quota_drop, 100 = hard
cutoff). KERNEL_UNSUPPORTED_FILTERS is gone entirely — kernel/relay
eligibility is now purely topological. Both modes gate on ebpf=1 from
the per-process tc capabilities probe (error names the setcap fix); the
cleanup path (modes off) only talks to the eBPF commands when the probe
reported them. Reconcile is a plain re-set: the netem reset-before-set
already detaches the program and clears uBridge's per-interface
registry, so a mode set after it is a fresh load+attach.
Documented semantic difference: the relay counts both directions
through one bridge counter, the kernel counts per direction — N=3
round-trip loss is 1-(2/3)^2 = 55.6% on kernel vs ~1/N on relay
(measured 57%). window_drop is NOT exposed: the delivered
implementation advances the window with no gap, making 'outside the
window packets pass' unreachable (needs outage/period fields —
recorded in the spec); flow_drop awaits a parameter-shape decision.
Also fixes a pre-existing restart bug the e2e exposed: _bridges (relay
bridge names) was never cleared on stop, so restarting a node with a
relay link skipped 'bridge create' and failed on add_nio_udp.
e2e (isolated instance): 13/13 — pref-1 tc_impair classifier on both
veths, 57% round-trip for N=3, -1 = exact 100%, quota hard cutoff,
delay coexistence, clean teardown, suspend/resume, node restart,
relay-leg frequency_drop regression through an Ethernet switch. Full
suite: 1925 passed.
Surface the netem extensions delivered in uBridge feature/tc-netem-ext
as GNS3 filter types: rate (tc-style bandwidth string), reorder (needs
delay), gemodel (Gilbert-Elliot bursty loss, exclusive with
packet_loss), duplicate, seed and limit, plus the delay jitter
distribution and the loss/dup correlation parameters. All are
kernel-datapath only — the relay's packet-filter registry has no
equivalent, so available_filters hides them on relay links, setting one
on a created relay link returns 409, and the project-load path drops
them with a warning (update_filters runs before the datapath is
decided, so it cannot reject there). Validation mirrors the tc grammar:
reorder requires delay, gemodel and packet_loss are mutually exclusive,
a distribution requires jitter > 0, rate is integer+unit capped at
100gbit.
The translation in DockerVM._netem_command_parts emits the frozen
grammar order and gates extension keywords on the 'tc capabilities'
netem token list (probed once per uBridge process; a plain
delay/loss/corrupt/dup filter never probes, keeping old uBridge builds
untouched; the correl suffix has no token and gates on 'rate' as the
extension-build marker).
Reconcile became reset-before-set: the kernel's netem change merges
optional attributes (rate, correlation, reorder, corrupt, gemodel,
distribution, seed keep their previous value when the new message omits
them), so removing a parameter needs an explicit 'tc reset' — the
bpf_drop filters are re-added right after in the same flow, so the
clsact churn is invisible. The capability check runs before the reset
so a failed update leaves the previous qdisc in place.
e2e (isolated instance, kernel link): 24/24 — rate 512kbit adds exactly
2x the per-packet serialization to the RTT (45.5 ms for 1400-byte
pings), paretonormal jitter + rate-cleared leak check, reorder gap 5,
gemodel 50% bursty loss, duplicate, loss 30% correl 50%, seed 42 +
limit 5000 visible in the qdisc dump, suspend/resume and node restart
keep the filters, relay link rejects rate with 409, teardown leaves no
netem. Full unit suite: 1916 passed.
The GNS3 bpf filter (one expression per line, any line matching drops the
packet) now runs on the kernel datapath: uBridge's tc bpf_drop compiles
each line with libpcap (same compiler as the relay filter) into classic
BPF, attaches it to the veth host end's clsact egress as a cls_bpf
classifier with a gact TC_ACT_SHOT action, and the kernel migrates the
cBPF to eBPF internally -- no CAP_BPF needed.
- reconcile is flush + one add per line at priorities 10, 11, ... (OR
semantics, same as the relay's per-line filters); tc reset (link
delete / clear) is the full restore in uBridge and clears them
- capability-gated: the compute probes "tc capabilities" once per uBridge
process (cached, invalidated on stop); without cbpf=1 the filter apply
fails with an actionable upgrade error, and old uBridge builds without
the tc module are never touched when no bpf filter is present
- a line that compiled for the controller's tcpdump but not for the
compute's uBridge libpcap is skipped with a warning, mirroring the
relay path
- KERNEL_UNSUPPORTED_FILTERS shrinks to frequency_drop (its eBPF stateful
classifier is still pending, spec part B)
e2e (22/22): bpf "icmp" = 100% loss; size-discriminating expression
("greater 150") passes 98-byte and drops 300-byte pings (real byte-level
match); two-line OR; coexistence with netem (delay 50 -> small pings
100.2 ms while big dropped); clear removes clsact; suspend/resume keeps
the drops; link delete + recreate leaves no residual filters.
Impairment filters with a netem equivalent (delay, packet_loss, corrupt)
now run on the kernel datapath as one tc netem qdisc per veth host end,
pushed through uBridge's netlink tc module (tc netem set / tc reset).
This removes the relay delay filter's nanosleep bottleneck (upstream
Both link endpoints carry the filters: each end's qdisc egress covers
the traffic entering that container, so every direction is impaired
exactly once -- the same net effect as the relay, where both directions
cross the single filtered bridge.
- controller: eligibility keys on relay-only types (frequency_drop, bpf)
instead of any filter; kernel links push the real filters (the
synthetic suspend frequency_drop no longer flips a suspended link to
relay on reopen/reset); update_filters 409s only relay-only types;
available_filters hides them on kernel links
- compute: create_nio whitelists netem-capable filter types; the NIO
update path keeps its own guard (PUT mutates the NIO in place);
_ubridge_apply_netem translates the filter dict into one atomic
netem-set (full re-apply IS the reconcile); node restart restores the
qdisc, link deletion detaches it (the veth survives the link)
- e2e (27/27): delay 100 -> 200.2 ms RTT, atomic replace 50 -> 100.2 ms,
clear -> baseline, packet_loss 30 -> 48 % round-trip (expected 51 %),
suspend/resume and node restart keep the qdisc, link delete leaves no
residual impairment
Markers no longer disqualify the kernel datapath. They ride the NIO like
on the relay path and attach to the veth host end through uBridge's
marker add_kernel/delete_kernel/enable_kernel commands (AF_PACKET taps,
same BPF/direction/signal semantics as the relay mark filter).
- base_node: marker anchors are now polymorphic (relay bridge name or
kernel veth host interface); the reconcile loop is datapath-agnostic
and DockerVM overrides the add/delete/enable primitives to translate
the commands. Marker-name validation extracted for both add paths.
- docker_vm: kernel NIO connect/update apply markers on the veth anchor;
link deletion tears markers down explicitly (the veth survives the
link, unlike a relay bridge whose death drops its filters).
- controller: eligibility and start_marker no longer exclude markers or
project-level marker definitions; the kernel NIO carries the capture
node's marker specs.
- NIO creation accepts markers on kernel NIOs (filters still rejected).
Replace the capture rejection with wiring to uBridge's capture module:
an AF_PACKET socket bound to the veth host end writes into the same pcap
file the relay path uses (capture start_kernel <if> "<pcap>" /
capture stop_kernel), so the pcap streaming to clients is unchanged.
- capture survives node restarts: _connect_nio re-arms it when the NIO
is already capturing, mirroring the relay path
- uBridge's kernel capture is a singleton per process: a concurrent
second capture on the same node surfaces uBridge's EALREADY error
- update the datapath docs: filters and markers remain relay-only,
capture is now served on both datapaths
Eligible links (both endpoints Docker, same compute, no filters/markers,
stopped nodes, no unix-socket NIO containers) are wired as veth pairs
enslaved into a per-link Linux kernel bridge (gns3 + 11 hex of the link
id, filling IFNAMSIZ) instead of the uBridge UDP relay, so frames flow
entirely in the kernel.
- NIOBridge NIO type: the controller decides the datapath in
UDPLink._prepare and both computes enslave their deterministic gv*/gc*
veth pair via uBridge's docker/brctl modules
- carrier/suspend = host-end admin state; both endpoints race-safely
create/delete the bridge (EEXIST/EBUSY/ENOENT tolerated)
- veth adapters can still attach relay (UDP) links on a running node:
lazy relay bridge over AF_PACKET on the host end (add_nio_ethernet)
- filters/markers/capture are rejected with explicit errors on this
datapath (they live in the uBridge relay); vendor unix-socket
containers are excluded; Server.enable_kernel_datapath is the
kill-switch (default on)
- host-end veths survive container death and are removed on stop plus
swept by name on the next start (crash/stale recovery)
