Node._list_ports() rebuilds every Port object, and it runs on each node
update — including every compute node.updated notification (a node
reporting started is one). The links are unaffected by that rebuild, but
the fresh port objects started out with link=None, so after any node
update the "Port is already used" guard in Link.add_node stopped matching:
a second link on an occupied port reached the compute, where the port's
NIO was replaced before the attach failed on the already-bound anchor,
leaving the link half-torn-down (on IOU, deleting the project afterwards
left the node's anchor TAPs and a per-link bridge on the host).
Carry the link back-references over by (adapter_number, port_number),
first match wins, mirroring get_port; a port that still exists keeps its
link. Regression tests pin both the reference (test_node) and the guard
(test_link: the duplicate link is refused after a node update).
The Ethernet switch's kernel fast path: instead of a link crossing the
switch's per-port uBridge relay, the switch absorbs the peer's anchor into
its own kernel bridge. The peer's interface (Docker veth host end, QEMU
TAP, IOU port TAP, Dynamips port TAP) becomes the switch port, and frames
cross anchor -> switch bridge -> switch ports entirely in the kernel.
Wire format: the switch end receives nio_anchor ('join this interface to
my own bridge' — the mirror of nio_bridge), the peer end nio_bridge with a
null bridge ('your anchor is bridged elsewhere': carrier, markers and
impairments only — never bridge membership, and never a bridge delete, on
an interface this node does not own). Anchor names come from the shared
naming contract (utils.kernel_anchor), a pure function of node type, id,
adapter and port — the controller computes the peer's anchor while the
node may be stopped, which is what makes links to stopped nodes wireable.
Stopped peers defer the join; after any node of a link starts
(UDPLink.node_started) the controller re-pushes the switch NIO, and the
switch completes — or repairs, when a peer restart replaced its interface
under the same name — the join against the kernel's actual membership
instead of assuming it.
VLAN changes now edit membership in place: only the ports whose mode/VLAN
actually changed are touched, each losing exactly the previous mode's
entries the new mode does not want (the dot1q admits-all entry is one
range operation in both directions), and no port ever leaves the bridge to
change its VLANs. This replaces the old 'reset by re-enslaving' shortcut
(delif+addif on every wired port, added when the ports were the switch's
own TAPs): on absorbed anchors, re-enslaving an interface owned by another
node is where live testing watched links die — anchors occasionally lost
their bridge membership right after a ports_mapping update (later updates
then failed with delif EINVAL), reproducibly with qemu, IOU and Dynamips
peers and never with Docker's veths.
Eligibility: the switch side needs no capability of its own (its bridge
exists by construction); the peer must be able to anchor. Switch-to-switch
cascades stay on the relay — a kernel interface belongs to one bridge, and
joining two bridges needs a veth pair, deferred.
Verified live on a real server: qemu peers through four VLAN cycles with
both anchors enslaved throughout; a mixed switch (2 IOU + 2 Dynamips, four
kernel ports); Docker peers with real ICMP isolating and recovering (with
both anchors still enslaved); VPCS relay ports likewise in place.
Only relying on the image name lets a moved tag (e.g. a newer :latest)
silently serve stale content from a compute that already has an image
under the same name. When creating a Docker node, the controller now
pins the image id (Id from the Docker daemon on the controller host)
into the create payload. A compute holding a different image under the
same tag reports the image as missing, which routes it through the
image sync added by the previous commit and re-aligns the tag.
No new template fields or database changes: the controller host daemon
remains the source of truth and the pin is resolved per creation. When
the image is not available on the controller host the pin is omitted
and behavior is unchanged (the compute pulls from the repository).
When a Docker node is created on a remote compute whose Docker daemon
does not have the image, the compute now raises ImageMissingError
instead of blindly pulling from the Docker repository. The controller
exports the image from the Docker daemon on its host (docker save
stream) and streams it to the compute which loads it, so locally built
or docker-loaded images work across computes. When the image is not
available on the controller host either, the compute is asked to pull
it from the Docker repository as a fallback.
- add a POST /docker/images/load compute endpoint that streams a
docker save tar into the Docker daemon
- let Docker.http_query pass raw (non-dict) request bodies through so
the tar can be streamed to the daemon
- drop the inline pull from DockerVM.create() and the now unused
DockerVM.pull_image wrapper
Templates reference a config file with the GNS3_IOL_STARTUP_CONFIG
environment knob; the controller materializes the file content into
startup_config_content on node creation (sent once, knob consumed —
the same pattern as the IOU startup_config mapping). The compute builds
the content into the node's nvram_<app id> at the next start using the
IOU nvram_import utility (IOL and IOU share the nvram container format,
verified against iol-xe 17.18.02): valid config at boot, no setup
dialog, %h hostname substitution, hostname rewrite on rename.
Semantics verified against the runner: IOL boots from NVRAM whenever it
holds a config, so a plain stop/start never re-applies the startup
config and 'write memory' survives restarts; an explicit content edit
(PUT) is re-applied on the next start and wins over the saved config,
like IOU.
IOL interfaces come in 4-port units (Ethernet0/0-3, Ethernet1/0-3, ...),
addressed like IOU as (adapter_number, port_number 0-3):
- IOLDockerVM builds EthernetAdapter(interfaces=4) per adapter and asks
the runner for adapters x 4 interfaces (num-eth).
- DockerVM threads port_number through the NIO/capture API (the compute
routes parsed it from the URL but dropped it); single-port adapters
keep the historical bridge{N} names and command sequence, multi-port
adapters get one bridge per port (bridge{a}_{p}).
- The unix-socket NIO wiring addresses sockets flat across adapters:
adapter x ports-per-adapter + port, so single-port images keep their
exact socket layout.
- The controller port list for GNS3_IOL_RUNNER docker nodes is generated
by StandardPortFactory with the IOU naming (Ethernet{segment0}/{port0},
segment size 4); plain docker nodes keep eth{N}.
Add default_username/default_password as controller-only node properties
(the netmiko_device_type pattern): they are not sent to the compute,
persist with the project topology and can be updated or cleared per
node. Creating a node from a template seeds them from the template
appliance metadata, and the metadata itself is dropped there so it
never leaks into the node properties.
- install: resolve the image directory from the version's settings type and
skip image handling for docker appliances; guard appliance.images
- appliance schema: validate template_properties against template_type,
align cpu_throttling with the qemu template, add kvm and version idlepc
- conversion: map IOU image to path, kvm disable to accel=tcg, inherit only
same-type default settings, symbol fallback from the effective category,
template_properties cannot override structural fields
- allow clearing netmiko_device_type with an empty string
- download the template symbol regardless of the level it is defined at and
give qemu guests a default symbol
netmiko_device_type follows the CONTROLLER_ONLY_PROPERTIES pattern
(like console_auto_start): a node created from a template inherits the
template value, PUT /nodes can override it inside a topology, updates
never round-trip to the compute, and the value persists in the project
topology file.
