test(e2e): assert the §E.2 idle-silence window in every kernel scenario

The L2-anchor spec's behavioral guarantee — an idle link stays silent for
5 s once the enslavement burst settles — only ran in the Dynamips and
Docker suites. It now also runs in QEMU, IOU, the IOL container, the
switch fast path and the switch cascade, which covers every host-device
creation path:

* tap create (Dynamips/QEMU/IOU anchors), docker create_veth (Docker host
  ends; the cascade's race-loser end is hardened after create by the
  server), bridge add_nio_tap (the IOL container anchor, the fifth
  creator), and the brctl switch bridges, whose multicast snooping is off
  precisely so the bridge role can reach silence;
* each scenario silences its guests first (IOS interfaces shut through
  the console; Docker guests' links down) and re-verifies the ping after;
* the cascade measures 8 devices at once (four absorbed router anchors,
  both cascade ends, both switch bridges).

IOL 158 s, cascade 293 s, ESW fast path 378 s, QEMU 428 s, IOU 308 s —
all green.
This commit is contained in:
YueGuobin committed 2026-10-06 00:21:10 +08:00
1 parent 1f544c96a5
commit ff41a54364
11 files changed
+166 -16

No files matched your search

@@ -24,6 +24,8 @@ Real ICMP crossing the switch proves the datapath:
and defer the join; once the routers boot, the controller's re-push
makes the switch join their anchors — the switch bridge's members become
exactly the two router anchors (no relay TAPs anywhere);
* the L2-anchor spec §E.2 silence window with both routers shut: the
absorbed anchors and the switch bridge stay silent for 5 s;
* VLAN programming applies to absorbed anchors: different access VLANs
isolate the routers (ping dies), the same VLAN bridges them again;
* a ``delay 100`` filter lands as netem on the absorbed anchor (single
@@ -94,6 +96,16 @@ def _boot(server, project_id, node_id, timeout=360):
return console
def _eth_shutdown(console, shut):
"""Shut/unshut the router's f1/0 — the only legitimate speaker on the
segment (IOS's own CDP/keepalives) — for §E.2's silence window; the
address stays configured and answers once it is back."""
console.run("conf t")
console.run("interface f1/0")
console.run("shutdown" if shut else "no shutdown")
console.run("end")
def test_ethernet_switch_kernel_fast_path():
server = harness.live_server(kernel=True)
compute = server.compute
@@ -140,6 +152,19 @@ def test_ethernet_switch_kernel_fast_path():
baseline = harness.wait_ping(c1, "10.1.1.2")
assert baseline["success"] == 100, baseline["raw"]
# L2-anchor spec §E.2: with both routers shut, the absorbed anchors
# and the switch bridge stay silent for 5 s (the bridge is created
# with multicast snooping off precisely so the bridge role can).
if harness.l2only_supported():
for console in (c1, c2):
_eth_shutdown(console, shut=True)
harness.assert_idle_silence(a1, a2, sw_bridge)
for console in (c1, c2):
_eth_shutdown(console, shut=False)
assert harness.wait_ping(c1, "10.1.1.2", attempts=5)["success"] == 100
else:
print(".. uBridge without link l2only: skipping the §E.2 assertion")
# L2-anchor spec §E.1: the absorbed anchors and the switch bridge
# carry no L3 identity (skipped on a uBridge without `link l2only`),
# and the joined ports are FORWARDING — the silent-failure guard.